Burnishing Concrete Floors

Website

This new unique technology to the market provides significant cost savings and options to concrete floor finishes. It provides a dust proofed, abrasion resistant floor with burnishing only. The Armourtech Floor process utilizes Colloidal Silica Technology to produce a premium Hardened, Densified surface with shine. No grinding is required.

Armourtech Floor PRO FLOAT finish options for slabs treated Utilizing Armourtech PRO FLOAT (burnishing only)

Option 1:

After 21 – 28 days Clean slab with an auto scrubber and Red/Black pad.

Apply Armourtech Protector (application of Protector directly on PRO FLOAT slab should be done only when the moisture content is low and controlled) and burnish with diamond impregnated pads with minimum 2000 RPM.

Option 2:

After 21 – 28 days Clean slab with an auto scrubber and Red/Black pad.

Apply Armourtech Densifier or XL Densifier and burnish with diamond impregnated pads with minimum 2000 RPM machine.

Option: Application of Protector for increased shine if required.

Clean slab with auto scrubber red/black pad and water once, completely dry apply Armourtech Protector and burnish with diamond impregnated pads with minimum 2000 RPM machine.

Option 3:

Apply Armourtech Densifier or XL Densifier directly after a pour.

After 21 – 28 days Clean and Burnish with diamond impregnated pads with minimum 2000 RPM machine.

Option: Application of Protector for increased shine if required.

Clean slab with auto scrubber red/black pad and water, once completely dry apply Armourtech Protector and burnish with minimum 2000 RPM machine.

Option 4:

Armourtech Floor Hardwear Floor (no grinding)

Breakthrough Technology that provides a Densified, Dust Proofed, Abrasive Resistant floor with a Shine.

Option 5:

Armourtech Floor Exposed Aggregate (polished floor)

Armourtech produces a better polish with the ability to achieve higher shine finish with lower grit abrasives.

The Armourtech Hardwear Floor and Exposed Aggregate Floor and Armourtech Floor systems can be used on a standard slab that has been placed normally without using PRO FLOAT and will provide a superior cost-effective finish and result than standard placement methods.

The Armourtech Floor utilizes the Technology of Armourtech Colloidal Silica to produce a premium Hardened, Densified surface with sheen.

No grinding is required (burnishing only) and the following is a method of treating concrete floors with the Armourtech Floor process.

Polished Options for Concrete Slab Placed with STD Method (no PRO FLOAT)

Option 1:

Apply Armourtech Densifier or  Armourtech Densifier XL directly after pour once all surface water has gone. After 21 – 28 days Clean with water and stripper pads. Burnish with minimum 2000 RPM machine with Diamond Impregnated Pads.

To increase shine further and increase stain resistance, apply Armourtech Protector.

Option 2:

After 21 – 28 days clean with water and stripper pads and apply Armourtech Densifier or Armourtech Densifier XL Burnish with minimum 2000 RPM machine with Diamond Impregnated Pads.

To increase shine further and increase stain resistance, apply Armourtech Protector.

Option 3:

Apply Armourtech Floor Hardwear Floor Process after 21-28 days

Option 4:

Armourtech Floor Exposed Aggregate (polished floor) After 21-28 days proceed with standard Armourtech Polishing protocols.

Visit company website
Request price / brochure
Downloads
Contact the supplier

Also from Armourtech

Done tagging
Full screen

Burnishing Concrete Floors

This new unique technology to the market provides significant cost savings and options to concrete floor finishes. It provides a dust proofed, abrasion resistant floor with burnishing only. The Armourtech Floor process utilizes Colloidal Silica Technology to produce a premium Hardened, Densified surface with shine. No grinding is required.

Armourtech Floor PRO FLOAT finish options for slabs treated Utilizing Armourtech PRO FLOAT (burnishing only)

Option 1:

After 21 – 28 days Clean slab with an auto scrubber and Red/Black pad.

Apply Armourtech Protector (application of Protector directly on PRO FLOAT slab should be done only when the moisture content is low and controlled) and burnish with diamond impregnated pads with minimum 2000 RPM.

Option 2:

After 21 – 28 days Clean slab with an auto scrubber and Red/Black pad.

Apply Armourtech Densifier or XL Densifier and burnish with diamond impregnated pads with minimum 2000 RPM machine.

Option: Application of Protector for increased shine if required.

Clean slab with auto scrubber red/black pad and water once, completely dry apply Armourtech Protector and burnish with diamond impregnated pads with minimum 2000 RPM machine.

Option 3:

Apply Armourtech Densifier or XL Densifier directly after a pour.

After 21 – 28 days Clean and Burnish with diamond impregnated pads with minimum 2000 RPM machine.

Option: Application of Protector for increased shine if required.

Clean slab with auto scrubber red/black pad and water, once completely dry apply Armourtech Protector and burnish with minimum 2000 RPM machine.

Option 4:

Armourtech Floor Hardwear Floor (no grinding)

Breakthrough Technology that provides a Densified, Dust Proofed, Abrasive Resistant floor with a Shine.

Option 5:

Armourtech Floor Exposed Aggregate (polished floor)

Armourtech produces a better polish with the ability to achieve higher shine finish with lower grit abrasives.

The Armourtech Hardwear Floor and Exposed Aggregate Floor and Armourtech Floor systems can be used on a standard slab that has been placed normally without using PRO FLOAT and will provide a superior cost-effective finish and result than standard placement methods.

The Armourtech Floor utilizes the Technology of Armourtech Colloidal Silica to produce a premium Hardened, Densified surface with sheen.

No grinding is required (burnishing only) and the following is a method of treating concrete floors with the Armourtech Floor process.

Polished Options for Concrete Slab Placed with STD Method (no PRO FLOAT)

Option 1:

Apply Armourtech Densifier or  Armourtech Densifier XL directly after pour once all surface water has gone. After 21 – 28 days Clean with water and stripper pads. Burnish with minimum 2000 RPM machine with Diamond Impregnated Pads.

To increase shine further and increase stain resistance, apply Armourtech Protector.

Option 2:

After 21 – 28 days clean with water and stripper pads and apply Armourtech Densifier or Armourtech Densifier XL Burnish with minimum 2000 RPM machine with Diamond Impregnated Pads.

To increase shine further and increase stain resistance, apply Armourtech Protector.

Option 3:

Apply Armourtech Floor Hardwear Floor Process after 21-28 days

Option 4:

Armourtech Floor Exposed Aggregate (polished floor) After 21-28 days proceed with standard Armourtech Polishing protocols.

Visit company website
Request price / brochure
Downloads
Contact the supplier

Also from Armourtech

Done tagging
Full screen

Burnishing Concrete Floors

This new unique technology to the market provides significant cost savings and options to concrete floor finishes. It provides a dust proofed, abrasion resistant floor with burnishing only. The Armourtech Floor process utilizes Colloidal Silica Technology to produce a premium Hardened, Densified surface with shine. No grinding is required.

Armourtech Floor PRO FLOAT finish options for slabs treated Utilizing Armourtech PRO FLOAT (burnishing only)

Option 1:

After 21 – 28 days Clean slab with an auto scrubber and Red/Black pad.

Apply Armourtech Protector (application of Protector directly on PRO FLOAT slab should be done only when the moisture content is low and controlled) and burnish with diamond impregnated pads with minimum 2000 RPM.

Option 2:

After 21 – 28 days Clean slab with an auto scrubber and Red/Black pad.

Apply Armourtech Densifier or XL Densifier and burnish with diamond impregnated pads with minimum 2000 RPM machine.

Option: Application of Protector for increased shine if required.

Clean slab with auto scrubber red/black pad and water once, completely dry apply Armourtech Protector and burnish with diamond impregnated pads with minimum 2000 RPM machine.

Option 3:

Apply Armourtech Densifier or XL Densifier directly after a pour.

After 21 – 28 days Clean and Burnish with diamond impregnated pads with minimum 2000 RPM machine.

Option: Application of Protector for increased shine if required.

Clean slab with auto scrubber red/black pad and water, once completely dry apply Armourtech Protector and burnish with minimum 2000 RPM machine.

Option 4:

Armourtech Floor Hardwear Floor (no grinding)

Breakthrough Technology that provides a Densified, Dust Proofed, Abrasive Resistant floor with a Shine.

Option 5:

Armourtech Floor Exposed Aggregate (polished floor)

Armourtech produces a better polish with the ability to achieve higher shine finish with lower grit abrasives.

The Armourtech Hardwear Floor and Exposed Aggregate Floor and Armourtech Floor systems can be used on a standard slab that has been placed normally without using PRO FLOAT and will provide a superior cost-effective finish and result than standard placement methods.

The Armourtech Floor utilizes the Technology of Armourtech Colloidal Silica to produce a premium Hardened, Densified surface with sheen.

No grinding is required (burnishing only) and the following is a method of treating concrete floors with the Armourtech Floor process.

Polished Options for Concrete Slab Placed with STD Method (no PRO FLOAT)

Option 1:

Apply Armourtech Densifier or  Armourtech Densifier XL directly after pour once all surface water has gone. After 21 – 28 days Clean with water and stripper pads. Burnish with minimum 2000 RPM machine with Diamond Impregnated Pads.

To increase shine further and increase stain resistance, apply Armourtech Protector.

Option 2:

After 21 – 28 days clean with water and stripper pads and apply Armourtech Densifier or Armourtech Densifier XL Burnish with minimum 2000 RPM machine with Diamond Impregnated Pads.

To increase shine further and increase stain resistance, apply Armourtech Protector.

Option 3:

Apply Armourtech Floor Hardwear Floor Process after 21-28 days

Option 4:

Armourtech Floor Exposed Aggregate (polished floor) After 21-28 days proceed with standard Armourtech Polishing protocols.

Visit company website
Request price / brochure
Downloads
Contact the supplier
Done tagging
Full screen