Milu Mod Back-to-wall Toilet + Odourless by Expella

• Domestic
• Hotel
• Commercial

The Milu Mod Back-to-wall Suite is a standard toilet with Odourless by Expella pre-installed inside the cistern. The suite must be installed by a qualified plumber in accordance with AS/NZS 3500. Installation is similar to installing any other standard back-to-wall toilet but requires the addition of an electrical power source for the Odourless by Expella system. A qualified electrician should install a general power outlet (GPO) within 3.5 meters of cable length to the toilet. The location of the GPO should allow future access to the 9VDC power transformer.
Expella recommends that the Odourless by Expella system be activated with the Expella PIR Motion Sensor or with the bathroom light. It can also be shared with the exhaust fan switch or by a designated switch, depending on your preference.
The Milu Mod Back-to-wall Suite is available with back or bottom water inlet options. If you are replacing your existing toilet, it’s recommended to consult with your plumber to ensure the correct option is purchased. You should also discuss the water inlet location and floor waste set-out with them. A full installation manual is provided with the toilet suite; refer to the product sheet for dimensions.

Maintain the Milu Mod Back-to-wall Suite as you would a normal toilet with regular cleaning. The seat has a top fixing with quick release for easy cleaning. All internal components (inlet valve, flush valve, and Odourless by Expella system) are accessible by removing the cistern lid. The Odourless by Expella system is secured within an ultrasonically welded ABS plastic case and requires no maintenance. As with all electrical products, access to the adaptor is recommended.

• Vitreous China: 10 years
• Odourless by Expella: 3 years
• Inlet and flush valve: 2 years
• Toilet seat: 1 year
  Warranty applies from the date of purchase. Proof of purchase is required. Refer to our warranty page for more information.