Zurn Exposed Mounted Sluice Sink Flush Valve

By MacDonald Industries
Website

Zurn Model Z-6000XL-SL flush valve is a manually operated sluice sink flushing valve with toggle handle actuation with an approved vacuum breaker allowing direct connection to potable water supply without any additional backflow protection. The standard valve is pre-set to deliver a 6L flush and has achieved the distinction of Australian Standards Watermark approval and WELS 1 Star rating. Valve upgradable to 4.5L flushing should regulations permit.

Pipework design is critical to correct valve operation and must be completed by a suitably qualified person.

Flow rings supplied with the valve allow the installer to increase the flush volume to either 9 or 12 litres if required (WELS 0 Star rated).

In order to comply with approvals is not possible to remote mount this valve and extend any pipework.

Details
  • Category
    Other Accessories
  • Brand
    Zurn
General
  • Type of use
    Commercial and Residential
Specifications

Models:

Z-6000XL-SL - Standard valve with 25mm isolator.

MacDonald Industries
View locations (2)
Get in touch
Visit Website

About the
Seller

  • Products listed

    152

  • Recent Responsiveness

    100%

    Usually responds within
    24 hours on weekdays

New Zealand's Leading Commercial Bathroom Products Supplier

Bathrooms for public buildings have a unique set of requirements.  

Unlike residential environments these bathrooms can be subject to intermittent, intensive use by a range of diverse users over short and long periods of time. Solutions need to provide robust, efficient and cost effective whole-of-life outcomes. Hydraulic design with the appropriate behind and front-of-wall fittings are vital for the long term viability of a commercial bathroom. 

With over 55 years experience in the design, specification, supply and installation of bathrooms for hospitals, schools, prisons, shopping malls, swimming pools, marae's, public buildings, sports stadiums, airports and public toilets Macdonald Industries has seen it all.  

Our Technical Consultants are available to support Architects, Engineers, Plumbers and installers through the most complex of installations.

Our customers demand;

- reliability
- recognised performance
- efficiency
- robustness and
- cost effectiveness.

MacDonald Industries manufacture bespoke solutions such as Warden, Waterguard and Solo electronic water controllers and choose their supply partners from leaders around the world such as Delabie, KWC-Franke, RAK, ASI, WISA and Zurn Wilkins .