Our Jacks Point Project and the Choice to Install a Stovax

10 September 2020

 • 

4 min read

banner
A discussion about our build in Jacks Point, Queenstown and the decision to install a Stovax fire in our home.

We had previously been people who liked to have a lot of say in the design of a home. Upon buying our section in Jack’s Point, Queenstown, however, a lot of this choice was taken away from us.

Jack’s Point is an area that has quite strict building conditions that you must stick to. The homes have to be architecturally designed by particular approved Architects, there are few cladding options, colour choice is limited, house design has to be approved by the Jack’s Point board and there are plenty of restrictions around what is allowed and not allowed be seen from the road and or golf course.

This meant that we had to trust very much in our chosen Architect to design a home that met our needs, based on discussions and emails that we were having to and fro. Though hard initially, this was also great for us, as we have so many amazing viewing pathways in our home out to the most beautiful of views that we would have never spotted and gained on our own design.

We had things that we weren’t willing to pass up on – like having a log burner for example, or the size we wanted our bedrooms to be etc, but otherwise, our home was very much tailored to our family and our requests by our Architect, Daniel Friedrich of DF Design.

In simplest terms, we requested a design that was functional, comfortable and energy-efficient with a strong focus on sustainability, captures the stunning Jack’s Point views while creating privacy and flow, all while fitting with the regulations of the sub-division, making a visual impact and standing out slightly against many similar-looking homes due to its bespoke concept. And it was from there, that we ended up with our beautiful, dream home.

Both my husband and I loved wood burners. I grew up with a log burner in Invercargill and remember fondly as a kid jumping out of the bath and immediately being sent down to the fire in the living area to get changed into our pyjamas in the warmth and let the fire dry our hair off. When we moved to Christchurch, my parents bought a home with the 1970s styled diesel internal heating system, but it also had a log burner…the heater hardly ever got used! When my husband and I built our first home together in 2014-2015, one of the things we loved most about our section was that it was in an area that allowed log burners and this was important to us. Building while pregnant with our first child, we were so excited to sit around the fireplace through winter, creating memories as a new family and we certainly did that! So when this build became a reality for us there was never a question over whether a log burner would be put in or not, it was a necessity – it has very much become a way of life for us.

There are so many moments when it would be so easy to say: “no we can pay someone else to do that job”, or “let’s take the easy option for that decision” or even “let’s go for the cheaper option”. What made building this home so rewarding is that we made all of our decisions largely with our heart: what would suit our family most, what would fit best with our way of life, what would take the best care of our children and ensure they grow up in a sustainable, healthy and comfortable environment.

We wanted to very much focus on producing a home that was clever; not only did the home heat up well, but it retained heat and used it sensibly. Decisions to stick to natural and sustainable products for our build might not have been the cheapest option at the time, but it certainly is paying us back in huge amounts already and that is incredibly rewarding in itself. From choosing a fully insulated MaxRaft floor slab to choosing woollen carpets, triple glazed windows, self-oiling larch cladding and of course our Stovax log burner which uses a renewable resource, is clean air approved, efficient and strikingly beautiful.