Access Panel - Paintable, Matt MDF

Masons Paintable Access Panel provides easy access through non-fire rated dry-lined walls and ceilings to concealed spaces. It is pre-primed and ready for painting and has a noise reducing liner.

This Panel is made from pre-finished matt MDF with a ‘push-catch’ closing system, a metal frame, beaded plaster-ready trim and a noise reducing liner. This hatch is perfect for both residential and commercial buildings.

Details
  • Category
    Construction 4.0, Wall & Ceiling Hatches
  • Range
    Masons Access Panel
Specifications

Access Panel, Matt, Paintable - 600 x 600mm

Installation Guide

  • Measure across the inner flanges for the access panel.
  • Cut a hole in the plaster board to match measured panel size adding 2.5mm each side to allow for clearance (e.g. 605 x 605mm for the 600mm panel).
  • For 600 x 600 mm access panel, frame out the cut opening on the hidden (non visible) side of the plasterboard. Check access panel fit before fixing off the opening framing.
  • Bend the steel tie tags, located around the inside of the frame to the vertical position and slot the hatch (without door for easy installation) into the framed opening.
  • Secure the steel tie tags to the stud or support framing OR fold them over to secure to the plaster board.
  • Fix screws through the access panel frame and tags to the timber supporting framing until the access panel is flush and securely fixed.
  • Insert the door and secure with screws provided.
  • Plaster in the beaded trims surrounding the access panel.
  • Paint the access panel and plastered areas to match.
Scope of use

Application

Easy access to:

  • Ceiling spaces and bulk heads.
  • Roof spaces: Insulation, framing, inspection of underlay and roofing. Vermin control.
For any enquiries regarding purchasing or using any of our products. Complete the contact form below, or contact us on 0800 522 533.
Visit Website

About the
Seller

Masons provide a range of quality trade building products from a complete Enclosure Building Wrap System and Exterior Cladding, to Brick Reinforcement, and are a crucial supplier in the New Zealand building industry.

Masons strive to be at the forefront of developing innovative products that raise the standards of New Zealand building products.