HB2247 600mm Off-Set D Pull
The new HB2247 600mm off-set pull handles are manufactured from solid brass to provide a classic look for glass, timber, and aluminium doors. These pulls can be used as through fix, back to back pairs, and have fittings for use on glass doors. The addition of the HB2260 Knob provides both a finishing detail, and can be used similar to a cabinet knob when the pull is required to one side of the door only.
Our D Pulls are fabricated from solid brass, and as such they are heavy. For cabinetry thickness doors (18-25mm) where a pull is required to one side of a door or drawer only, we recommend using shorter lengths, or for longer lengths using the through fix sets for optimum stability. We advise installing the optional flange/rose on all single side fixing, and on installations into soft woods such as cedar and pine.
Please note: these pulls are fabricated from solid brass bar, and as such are heavy items (1-2.5kgs each) and not specifically designed for 18-24mm cabinetry doors. If you are looking at using these on cabinetry the Face Fix option will not suitable. For this application please use the Through Fix sets which have an additional matching “cap” on the inside of the door to hold handles secure.
- CategoryPull Handles
More from
Halliday + Baillie
About the
Seller
Halliday + Baillie is a New Zealand design company that has been operating for over 26 years, and exporting hardware worldwide for well over 20 years.
We expanded H+B into Australia in 2003 with main hub in Sydney and more recently a display studio in Melbourne. We have suppliers all around Australia who help Halliday + Baillie designs be available all through Australia.
Email us for more on: sales@hallidayandbaillie.com
All our Halliday + Baillie products are proudly designed and manufactured in New Zealand.
Our design encompasses quality, flair, functionality, and longevity.
Products are proudly produced in New Zealand where lower volumes enable careful monitoring with a correspondingly high production quality. Handles may be turned a thousand times a day, so materials and finish are amongst the highest priorities. Longevity has become the undisputed hallmark of our success.
The range includes door hardware, sliding door hardware (including a full range of flush pulls, end pulls, flush bolts, locking and privacy sets etc), stair rail brackets, door stops, drawer and blind extrusions and wet area vents.
Halliday + Baillie architectural hardware products not only look good – they feel good, and the team is continually striving for an aesthetic which will stand the test of time.
Along with our own products, Halliday + Baillie are also the exclusive suppliers in New Zealand and Australia for both the infamous German FSB range of architectural hardware over 120 years old + stocking of the first + original concealed hinges TECTUS by Simonswerk. Simonswerk are also over 135 years old.
- ArchiPro Member since2021
- LocationView all locations (+1)
- More information