HB695 Series Sliding Door Privacy Lock - 55mm Backset
The HB695 250mm length privacy sliding door lock includes a snib flush pull inside and emergency release flush pull outside for safe, efficient, locking on bathroom and washroom cavity sliders. The HB695 comes with a small recessed end pull for easy use to bring slider from pocket. Minimum door thickness required is 38mm. For 35mm-38mm door thickness, please order the HB690/35 (170mm long pulls) with shallower flush pulls.
Available in HB690 as pictured 170mm + HB695 (250mm).
- CategoryPull Handles, Cavity Slider Doors, Internal Doors
- RangeCavity Slider flush privacy locks
- BrandHalliday + Baillie
- DesignerHalliday + Baillie
Material: Diecast zinc with brass and 316 stainless steel
Backset : 55mm
Minimum door thickness : 38mm
Flush pulls : 250mm x 36mm x 11mm
Suitable for timber or aluminium doors.
For finish options please see our current Finishes Sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.
Flush pulls are designed to be mounted with the body within the thickness of the door, and the face plate on the door surface – total projection is 2mm. Fully recessed mounting is possible on timber doors with the appropriate door thickness. Using glue, epoxy or silicone products etc to secure flush pulls to the door is not required or recommended for installation, and may void warrantee. Glue, epoxy, or silicone products can be used to secure the spindle bar to the back of the snib flush pull for example where sets have a flush pull to one side only.
Configurations:
HB 695 – Privacy Set with Snib Inside and Emergency Release Pull Outside
HB 696 – Snib In, No Pull Out
HB 698 – Snib In, Blank Out
HB 699 – Snib Pulls to Both Sides
Projects featuring
HB695 Series Sliding Door Privacy Lock - 55mm Backset
More from
Halliday + Baillie
About the
Seller
Halliday + Baillie is a New Zealand design company that has been operating for over 26 years, and exporting hardware worldwide for well over 20 years.
We expanded H+B into Australia in 2003 with main hub in Sydney and more recently a display studio in Melbourne. We have suppliers all around Australia who help Halliday + Baillie designs be available all through Australia.
Email us for more on: sales@hallidayandbaillie.com
All our Halliday + Baillie products are proudly designed and manufactured in New Zealand.
Our design encompasses quality, flair, functionality, and longevity.
Products are proudly produced in New Zealand where lower volumes enable careful monitoring with a correspondingly high production quality. Handles may be turned a thousand times a day, so materials and finish are amongst the highest priorities. Longevity has become the undisputed hallmark of our success.
The range includes door hardware, sliding door hardware (including a full range of flush pulls, end pulls, flush bolts, locking and privacy sets etc), stair rail brackets, door stops, drawer and blind extrusions and wet area vents.
Halliday + Baillie architectural hardware products not only look good – they feel good, and the team is continually striving for an aesthetic which will stand the test of time.
Along with our own products, Halliday + Baillie are also the exclusive suppliers in New Zealand and Australia for both the infamous German FSB range of architectural hardware over 120 years old + stocking of the first + original concealed hinges TECTUS by Simonswerk. Simonswerk are also over 135 years old.
- ArchiPro Member since2021
- LocationView all locations (+1)
- More information