Metalshield Premium by Dulux

• Sizes - 500ml, 1L, 4L
• Bases - Range of six bases: Black, Tractor Blue, Pewter, Signal Red, White and Industrial Aluminium
• Colour Range - Colour chart available in store. Can be tinted to a wide range of colours.

Use

Use in combination with Metalshield primers for industrial strength metal protection. An ideal topcoat for suitably primer interior and exterior metal surfaces. 

Application

Roller, Brush, Airspray.

Surface Preparation

NOTE: Ensure the surface has thoroughly dried prior to application. Commercial applications may require additional surface preparation. PRE-PAINTED METAL SURFACES: Scrape off all loose and flaking paint. Sand all surfaces to a flat finish. Dust off. If previously painted surface is in good condition then no primer is required. Treat any bare metal as below. AGED/LIGHTLY RUSTED SURFACES: Remove any rust by scraping, sanding or wire brushing. Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. Once dry, apply 1 coat of Metalshield All Surface Primer. NEW BARE STEEL/WROUGHT IRON: Wipe surface with Metalshield Brush Thinner to remove any residual grease, oils and dirt. Once dry, apply 1 coat of Metalshield All Surface Primer. GALVANISED IRON/ZINCALUME: Clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water. Once dry, apply 1 coat of Metalshield Etch Primer. ALUMINIUM, COPPER, BRASS AND STAINLESS STEEL: Clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt. Rinse with clean water. Once dry, apply 1 coat of Metalshield All Surface Primer.

Clean Up

Clean up with Metalshield Brush Thinner