Powaflex Acrylic Plaster System

Powaflex acrylic plaster is a fibre reinforced, organic base coat with increased impact strength and crack resistance that is designed for unique construction methods and harsh environment.

Features

• Specialized Construction Products Ltd Powaflex Plaster System is a plaster system is trusted for quality, strength, flexibility and long-term performance.
• Powaflex acrylic plaster is specially developed in NZ by Specialized Construction Products, Powaflex acrylic plaster is a fibre reinforced, organic base coat with increased impact strength and crack resistance that is designed for our unique construction methods and harsh environment.
• Thanks to its European polymer technology Powaflex has incredible flexibility whilst retaining its strength to provide a durable exterior plaster that allows for increased facade movement and impact resistance.
• Applied by hand or pump in conjunction with Specialized premium 160gsm fibreglass mesh and then covered with one of Specialized Construction Products Ltd acrylic finishing plasters the Powaflex system will give your home a highly flexible long lasting finish.
• Specialized Construction Products Ltd has full specifications for the Powaflex Plaster System for application over new substrates or existing substrates as a repair specification.

Scope of use

Base mesh coat for use over concrete and masonry surfaces. Can also be used as part of a repair system for existing plaster builds. PowaFlex must be top coated with an acrylic texture before the application of minimum two coats of 100% acrylic paint or an approved latex exterior paint system in accordance with Specialized Construction Products paint specifications.

Limitation on use

Ensure all surface preparation instruction are followed.

All freshly applied material must be weather protected for a minimum of 24 hours after application. Exposure of applied product to rain, snow, dew, or other inclement weather conditions, direct hard sunlight or sources of heat while it is curing may have a detrimental effect on the finish.

• DO NOT over­water, over mix, or remix aged PowaFlex with additional water.
• DO NOT mix more PowaFlex than you can use in 45 minutes.
• DO NOT use PowaFlex that has been mixed for more than one hour.
• DO NOT apply PowaFlex to wooden surfaces.
• DO NOT apply PowaFlex over wet, frozen or frost affected surfaces.
• DO NOT apply PowaFlex where it will be subjected to permanent immersion or where ponding will occur.
• DO NOT reactivate PowaFlex with water once it has begun to set.
• DO NOT wet the substrate prior to the application of PowaFlex.
• DO NOT apply PowaFlex unless the substrate has been properly cleaned, primed and prepared