Resene Concrete Clear

While concrete walls and surfaces are durable, they can be very tricky to keep clean. Small contaminants tend to get ingrained into the surface of the concrete and can be difficult, if not impossible, to clean.

Resene Concrete Clear is a tough waterborne glaze for use on concrete and brick surfaces. It enhances the colour and natural beauty of concrete, brick and stone and provides a thin protective layer that can be much more easily cleaned than the bare surface. Resene Concrete Clear is non-yellowing, resistant to alkaline cleansers, chipping, peeling, oil and fat splashes. It’s Environmental Choice approved and waterbased so it’s low odour and easy to wash up in water.

You can achieve a natural looking finish with concrete finished in Resene Concrete Clear. So when you’re choosing concrete don’t choose bare and unprotected, choose natural look and well protected.

Available in three gloss levels: flat, satin and gloss from Resene ColorShops and resellers.

View the Resene Concrete Clear Data Sheet.

Details
  • Category
    Exterior Paints
Specs / Details

Typical uses:

  • Brickwork/artificial brickwork 
  • Fibre cement 
  • High build acrylics 
  • Masonry surfaces 
  • Plaster

Physical properties:

  • Vehicle type: Acrylic-urethane
  • Pigmentation: None
  • Solvent: Water
  • Finish: Flat, satin, gloss
  • Colour: Milky – dries clear
  • Dry time (minimum): 30 minutes at 18°C
  • Recoat time (minimum): 2 hours
  • Primer required: Yes on porous and cementitious substrates
  • Theoretical coverage: 12 sq. metres per litre, coverage will vary with surface porosity
  • Usual no. of coats: 3
  • Abrasion resistance: Very good
  • Chemical resistance: Good
  • Heat resistance: Good
  • Solvent resistance: Good
  • Durability: Excellent 
  • Thinning and clean up: Water
  • VOC: Flat c. 48 grams per litre, Satin c. 63 grams per litre, Gloss c. 63 grams per litre, (see Resene VOC Summary)
Visit Website

About the
Seller

Resene has everything you need for your decorating project, from quality colour and paints, decorating accessories and professional advice to help you get a superb finish on your project inside or out. Choose from thousands of colours or let us create a custom colour match for you. Once you’ve chosen your favourite get it tinted into the Resene product of your choice using Resene’s exclusive non VOC tinters. Complement your paint choices with our wide range of wallpaper, wall decals, curtains and cushions to bring the complete look together.

If you’re painting a dark colour outside, consider opting for a Resene CoolColour™ finish. A Resene CoolColour is made with special pigment technology so it reflects more heat than normal, keeping your paint and home cooler.

We also have an extensive range of wood stains, metallics, clear finishes, specialist and textured finishes to bring out the best in your home.