VHP Value is a high performance, self-supporting, highly breathable, tough, synthetic roof underlay. A huge upgrade from Bituminous Paper.
3 pliable layers: a very high vapour permeable water-resistant membrane and two tough layers of non-woven polyolefin fabric. These layers assist in the control of condensation and water vapour. VHP Value Roof Underlay is not fire retardant.
It has the following benefits:
Intended Use
Masons Roof Underlays are for use as a self-supporting roofing underlay.
Building Code Provisions
Conditions and Limitations of Use
1. Masons Roof Underlays are certified for use as a roof underlay and air barrier:
a) on buildings situated in wind zones up to and including Extra High (as set out in NZS3604) with a minimum roof pitch of 3°,
b) under masonry or metal tile and profiled metal roof claddings,
c) in all locations including where it is exposed to view.
2. Masons Roof Underlay shall be:
a) installed in accordance with the manufacturer's installation manual, and
b) installed run vertically or horizontally with or without support for roof pitches greater than 10°, run horizontally with or without support or run vertically with support for roof pitches less than 10°, provided that support is provided where the span is greater than 1200mm, and
c) protected from direct sunlight within 21 days of installation.
Masons provide a range of quality trade building products from a complete Enclosure Building Wrap System and Exterior Cladding, to Brick Reinforcement, and are a crucial supplier in the New Zealand building industry.
Masons strive to be at the forefront of developing innovative products that raise the standards of New Zealand building products.