Weather Defence

Purple
Plasterboard

Weather Defence™: Designed for life!

Weather Defence™ is a rigid air barrier board used behind facade cladding systems to create a pressure equalised cavity for rain screen and ventilated facade systems. It is the quickest way to achieve a weathertight building, and offers an array of design benefits.
Build safer, quicker and smarter with Weather Defence™!

Details
  • Category
    Construction 4.0, Facade Screens, Pre-cladding
  • Range
    Plasterboard
  • Brand
    Siniat
  • Warranty
    N/A
General
  • Type of use
    Commercial
  • Assembly
    Professional assembly required
Specifications

Boards:

Weather Defence™ boards supplied by Siniat are 13mm thick, 1200mm wide and 2400mm long. The boards have a gypsum core and come with a distinctive purple fleece liner paper. 

Screws:

Siniat also supplies the following Weather Defence™ screws:

  • 6g x 38mm Weather Defence™ Screw - Fine thread drill point screw (for installation to metal framing)
  • 6g x 42mm Weather Defence™ Screw - Coarse thread needle point screw (for installation to timber framing)

Tape:

The following tapes are supplied by Pro Clima for the fixing of the joints:

  • Pro Clima Tescon Extora® Flashing Tape in widths of 60mm (for jointing) and 100mm and 150mm (for vertical control joints, internal and external corners, sides and top of openings).
  • Pro Clima Tescon Extoseal® Sill Tape in widths of 150 mm (for 92 mm stud frame sills) and 200 mm (for 150 mm stud frame sills)
  • Pro Clima Tescon® WS Wet Seal Connection Tape in a width of 38mm for sealant around external openings.

Installation:

Weather Defence is easy, safe and quick to install. The installation benefits include:

  • Projects can be closed in from the weather early. Weather Defence™ offers up to 12 months exposure to the elements.
  • It is much quicker to install Weather Defence than cement-based boards.
  • No power tools needed! Simply score and snap with a retractable knife. Easy to cut in situ.
  • The purple matt liner is non-woven and non-itch.
  • Joints are easily sealed with Pro Clima tape to form airtight junctions around complex details.
  • An additional pliable membrane may not be required, Climate Zone 1 excepted.
Scope of use

Weather Defence is a rigid air barrier that is used behind facade cladding systems to create a pressure equalised cavity.

Features
  • Weather Defence™, proudly manufactured by Siniat in Australia, has revolutionised building envelope construction and performance. 
  • Weather Defence is a rigid air barrier with a gypsum core that is used in rainscreen or ventilated facade systems. 
  • One of the best features of Weather Defence is that it provides the quickest way to achieve a weathertight building, allowing internal trades to keep working in inclement weather conditions. This can help avoid delays and save builders and contractors valuable time on site. 
  • Weather Defence™ is a great alternative to cement-based external sheathing boards. It is safe and easy to work with, and saves valuable time. The board can be simply be scored and snapped and there is no significant silica dust risk. 
  • Its excellent vapour permeability makes Weather Defence suitable for cold climates. It is classified as vapour permeable Class 4 and is recommended for use in Climate Zones 2 to 8. In Climate Zone 1, it is recommended to apply a vapour barrier over the external surface. 
  • Check the climate zone of your building on the NCC’s interactive climate map. 
  • Refer to the NCC to find out more about the latest condensation management guidelines (NCC2022 Part F8D3) and read our blog on the topic. 
  • Safer, quicker and smarter with Siniat's Weather Defence™

What Are The Sustainability benefits: The following properties make Weather Defence™ rigid air barrier boards a more sustainable choice:

  • The gypsum core is low in embodied carbon.
  • Product requires minimal packaging
  • The improved airtightness helps contribute to a building’s energy efficiency.
  • Ventilated facade systems improve durability of the facade by keeping external cladding dry.
Visit Website

About the
Seller

Siniat is part of the Etex Group, global leaders in lightweight construction materials. With plasterboard manufacturing facilities in Matraville (Sydney, NSW), Altona (Melbourne, Vic) Bundaberg (Qld); compound manufacturing in Altona; metal profile lines in Beenleigh (Brisbane, Qld), over 300 employees and a national distribution network comprising company owned stores, Plastamasta Franchises and independent distributors, Siniat is a major supplier to the lightweight construction industry and a one-stop-shop for a complete wall framing solution. 

A quality range of products and systems designed for performance provide solutions for fire, water, sound and impact resistance, as well as space-giving, acoustic and aesthetic design for all commercial and residential construction projects. 

Siniat’s innovative lightweight construction systems include plasterboard, steel framing systems for walls and ceilings, decorative, acoustic wall & ceiling linings, facade linings and plaster finishing compounds and accessories for internal applications.