HB1470 310mm Flush Pull for Sliding/Cavity Doors
Designed to compliment the existing range of Halliday and Baillie Flush Pulls, the new larger HB1470 responds to the increasing size of interior doors. For hinge or pivot doors the companion HB1475 Bi-fold Flush Pull keeps a seamless look across a project.
(Shown with an HB680 End Pull - Flush Pulls sold separately)
Minimum Door Thickness Required: 33mm if used back to back with no end pull, 42mm if used back to back with an HB680 End Pull as pictured.
Material: Solid brass
Flush pulls : 310mm x 50mm x 15mm
Suitable for timber or aluminium doors
For finish options please see out current finishes sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.
Flush pulls are designed to be mounted with the body within the thickness of the door, and the face surface mounted - total projection is 2mm. Glue, epoxy, silicone products etc are not required or recommended for installation, and may void warrantee.
- CategorySliding Door Gear, Cavity Slider Doors
Projects featuring
HB1470 310mm Flush Pull for Sliding/Cavity Doors
More from
Halliday + Baillie
About the
Seller
- Products listed
- Recent Responsiveness
83%
Usually responds within
8 hours on weekdays
Halliday + Baillie has been providing elegant handle solutions and architectural hardware products for over 25 years and designing and making their own hardware for almost two decades.
All our Halliday + Baillie products are proudly designed and manufactured in New Zealand. Support local and buy NZ-made!
Our design encompasses quality, flair, functionality, and longevity. Products are proudly produced in New Zealand, where lower volumes enable careful monitoring with high production quality. Handles may be turned a thousand times daily, so materials and finish are among the highest priorities. Longevity has become the undisputed hallmark of our success.
The range includes door hardware, sliding door hardware (including a full range of flush pulls, end pulls, flush bolts, locking and privacy sets etc), stair rail brackets, door stops, drawer and blind extrusions and wet area vents.
Halliday + Baillie architectural hardware products look good and feel good, and the team is continually striving for an aesthetic that will stand the test of time.
Besides our products, Halliday + Baillie is the exclusive New Zealand and Australia supplier for the German FSB range and the English Turnstyle Design Ranges of high-quality architectural hardware. Solid bronze, marine-grade stainless steel, and hand-stitched lever handles and knobs are just part of these extensive ranges.
- ArchiPro Member since2019
- LocationView address
- More information