HB890 Solid Brass Soft Edge Privacy Lock Set
The Halliday + Baillie HB890 soft edge flush pull privacy lock for sliding doors is the second offering in a new series designed for projects searching for a traditional look with a twist.
All the soft edge series are milled from solid brass, and come with matching finishes to our Brass D Pull range. The back plate is screwed fixed allowing for some finish customisation by the customer to match specific project aesthetics.
To ensure a seamless look throughout a project, matching blank style flush pulls (HB860) are available for use on passage cavity sliders. If using back-to-back together with the HB680, a minimum door thickness of 35mm is required.
All flush pulls have invisible fixing for a pared-back contemporary look.
- CategoryCavity Slider Doors, Flush Pulls
- BrandHalliday + Baillie
- DesignerHalliday + Baillie
- Year2023
- Warranty5 years
Flush pulls are designed to be mounted with the body within the thickness of the door, and the face plate on the door surface - total projection is 2mm. Fully recessed mounting is possible on timber doors with the appropriate door thickness. Using glue, epoxy or silicone products etc., to secure flush pulls to the door is not required or recommended for installation, and may void the warranty.
Material: Milled Solid Brass
Flush pulls : 170mm x 42mm x 13mm
Depth: 11mm
Finished in Aged Brass (AB), Polished Brass (PB), Satin Brass (SB) and Black (KC) only. All brass finishes are unlacquered allowing graceful aging over time. Additional custom finishes for bulk orders by request - please see your local Halliday + Baillie dealer for more information.
Suitable for timber or aluminium doors.
More from
Halliday + Baillie
About the
Seller
- Products listed
Halliday + Baillie has been providing elegant handle solutions and architectural hardware products for over 25 years and designing and making their own hardware for almost two decades.
All our Halliday + Baillie products are proudly designed and manufactured in New Zealand. Support local and buy NZ-made!
Our design encompasses quality, flair, functionality, and longevity. Products are proudly produced in New Zealand, where lower volumes enable careful monitoring with high production quality. Handles may be turned a thousand times daily, so materials and finish are among the highest priorities. Longevity has become the undisputed hallmark of our success.
The range includes door hardware, sliding door hardware (including a full range of flush pulls, end pulls, locking and privacy sets etc), stair rail brackets, door stops, drawer and blind extrusions and wet area vents.
Halliday + Baillie architectural hardware products look good and feel good, and the team is continually striving for an aesthetic that will stand the test of time.
Besides our products, Halliday + Baillie is the exclusive New Zealand and Australia supplier for the German FSB range and the English Turnstyle Design Ranges of high-quality architectural hardware. Solid bronze, marine-grade stainless steel, and hand-stitched lever handles and knobs are just part of these extensive ranges.
- ArchiPro Member since2019
- LocationView address
- More information