Markplan Consulting

Markplan is proud to carry out structural engineering design in almost all sectors of the industry at an exceptionally high standard, delivering practical solutions, cost effective designs whilst considering all aspects of the project requirements.

Residential - Institutional - Commercial Buildings

Full Civil and Structural design from concept to completion including:

• New buildings, offices, warehouses, manufacturing, industrial buildings, educational facilities, kindergartens, medical suites and centres.
• Alterations and additions to existing buildings of all types.
• Retaining structures - large & small of all types and materials
• Swimming pools - sprayed concrete.
• Ribraft®  floors - in the region of 8,000 - 10,000 already designed across the length of New Zealand.
• Peer Reviews
• Seismic Assessments
• Marine structures such as wharves, piers, jetties, breakwaters, marina gantries and foreshore protection.
• Bridge Design

If your project involves any of the above services - Contact us here!

If your project falls outside of this list, chances are we can help or can put you on to somebody that can help - Contact us here!

At Markplan the typical Civil Engineering projects we are involved in complement the Structural Engineering projects we carry out. Typically the Structural and Civil aspects of a particular project are undertaken side by side. We use Civil 3D design and draughting software to design and detail the majority of our Civil projects.  This allows us to incorporate 3D design into our overall process and complements our 3D REVIT structural design and draughting.

Stormwater

• Catchment analysis
• Design of reticulation systems
• Flood plain analysis
• Arrange soakage tests and CCTV surveys
• Stormwater treatment attenuation, detention ponds and structures of all types
• Design of stormwater re-use systems
• Rain gardens

Wastewater

• Catchment analysis
• Design of reticulation systems
• Design of sewage pumping stations and rising mains
• Wastewater discharge consent applications
• Operation, maintenance plans and manuals
• Wastewater assessment reports
• Manufacturing process wastewater treatment, recycling, disposal systems and reticulation

Earthworks and Land Development

• Erosion and Sediment Control
• Earthworks volumes and cut to fill design
• Access driveways and parking
• Large commercial carparks
• Commercial and Industrial yards
• Infrastructure reports to support Resource Consent applications
• Bridges and culverts

If your project involves any of the above services - Contact us here!

If your project falls outside of this list, chances are we can help or can put you on to somebody that can help - Contact us here!

Revit Draughting - Level of Service

At Markplan we pride ourselves on our extremely high-quality draughting service. Our draughting team is based in-house, which ensures very tight collaboration with our Engineers is maintained during the design phase. Our approach to producing high-quality structural drawings is the production of 3D models. This improves coordination and buildability on site, regardless of project size.

What to expect

LOD – ‘Level Of Development’ or ‘Level Of Detail’ is often referred to as a guide to what can be expected. This ranges from LOD100 (sketches) to LOD400 (where each and every bolt and plate is accounted for in a virtual model). Whatever level is required for your project, Markplan has the expertise to get you there. Refer to “LOD” below for more information.

Given our work at Markplan covers a very wide range, both in size and type, we offer varying levels of service (LOD) depending on what is required. A lower LOD is not to be confused with lower quality. High quality information is possible at all levels.

For larger or complex projects, we are finding that clients and/or design teams prefer an LOD350 level of service which aligns with projects utilising BIM principles.

LOD – Level of Development

LOD100

2D sketch or computer drawn details which may not be to scale. They can be symbols rather than accurate representations of the actual item. Typically used for early stages of a project, such as scheme design.

LOD200

Elements can be modelled in 3D space to represent a component. This is approximate only and may not be accurately positioned. Not all elements are modelled and plans are a mix of 3D elements and 2D lines and text. Only 2D documented plans and/or details can be expected as a final product

LOD300

All main elements are modelled in 3D and placed accurately in space. A selection of connections is modelled to ensure buildability. Details can be a mix of 3D and 2D elements to create the plans and detail documentation. LOD300 is a typical level reached when electronic coordination with the Architect is required. LOD300 models are NOT intended to be used for construction and hence cannot be passed on to fabricators / contractors to use.

LOD350

All main elements are modelled in 3D and placed accurately in space. All connections are modelled to a reasonable level so that the structural intent and construction technique become clear when viewing the model in its isolation from documented plans and details. The details will still have 2D elements and the model cannot be used in isolation from the construction documents. It is intended an LOD350 model is able to be sent on to fabricators and contractors to assist with the shop drawing process as part of their documentation.

LOD400

A fully modelled structure with all elements accurately placed in space, all connections complete. The model can be used in isolation from plans and documentation as all elements have information embedded within them. Measurements can be taken directly from the model and elements fully scheduled, hence fabrication drawings may not be required. This is the highest level of documentation and, as such, is time consuming to produce.

What is BIM?

BIM (Building Information Modelling) definitions vary across designers, constructors, and operators. The New Zealand BIM Acceleration Committee offers the following definition:

'BIM is a coordinated set of processes, supported by technology, that add value through the sharing of structured information or buildings and infrastructure assets.

'BIM typically includes information on design, construction, logistics, operation, maintenance, budgets, schedules, and much more, providing a far richer environment than traditional approaches. Information created in one phase can be passed onto the next phase for further development and re-use.

'BIM is not any single act or process, nor is it a 3D model in isolation, or computer-based fabrication. BIM is being aware of the information needs of others as you go about your work.’ – The NewZealand BIM handbook 2019

Residential Raft Slab Floors

Raft slab floors (including Ribraft®) are done as an almost stand-alone engineered item.

Our raft slabs are modelled in 3D and schedules are provided showing volume of concrete and volume of pods, right down to the dimension of every pod. Many contractors get pods pre-cut from the manufacturer, using our plans to minimise wastage and the need for cutting on site.

Civil Projects

Civil design and draughting is carried out in Civil 3D which complements the 3D Revit structural design and draughting process.

If your project involves any of the above services - Contact us here!

If your project falls outside of this list, chances are we can help or can put you on to somebody that can help - Contact us here!

We are Structural and Civil Engineers in Auckland & Wānaka, delivering practical Structural and Civil Engineering Design solutions for residential, commercial, and community projects across New Zealand. We have proudly served our valued clients for 30 years. We make complex structural and civil engineering simple and stress-free, delivering practical, buildable solutions with clear communication and real value.

With offices in Auckland and Wānaka, we are well positioned to service projects across the Auckland region and further north, as well as Queenstown Lakes and Central Otago districts, the wider South Island as well as provide services to the Pacific Islands.

Speak to real people

You'll deal directly with our approachable, experienced team. We take the time to understand your project, answer your questions, and work alongside you from concept through to completion.

Technically qualified team

Every member of our engineering team is technically qualified, giving you confidence that your project is backed by sound engineering expertise and practical experience.

Streamlined process

Our project management and tracking systems keep every project moving efficiently. You'll know where your project is at each stage, with clear communication throughout the process.

Practical solutions

With decades of experience across residential, commercial and civil projects, we've likely solved challenges similar to yours before. We focus on practical, buildable solutions that help keep your project on track.

Get in touch – we’d love to discuss your project.

At Markplan, our strength lies in our people. Our team of Chartered Professional Engineers, Structural and Civil Engineers, Draughtspeople, Engineering Technicians, and Administration team bring a wide range of experience across our projects.

Meet the Markplan team below and explore the talented people behind our projects.

https://markplan.co.nz/our-people/our-team/