Taylored Spaces services are outlined below and include the various stages of the design process, each of which requires the clients sign off prior to the next stage commencing. 
Each stage requires various degrees of input from each party. 

The office utilises Archicad CAD software.

Nathan Taylor is a Licensed Building Practitioner - Design Category 3. 
 

Initial meeting 

  • Meeting to establish the design brief including the client’s budget, timeframe and services required. The initial meeting will provide the scope of work and enable Taylored Spaces to provide a fee offer.

Concept

  • Before initiating concept drawings, town planning requirements are investigated to highlight any restrictions and resource consent requirements. Once established a sketch scheme including plans and elevations is produced matched to the design brief.

Developed Design

  • Further development of the concept drawings allowing the client to visual their project including 3D renders preliminary cross sections and confirming the construction methodology and materials. The developed design documentation will provide enough detail for a quantity surveyor or building contractor to review to ensure the budget aligns with the design.

Documentation

  • Preparation of the construction documentation for submission to the local territorial authority and building contractors. Working drawings including but not limited to site, floor, ceiling and finishes plans, elevations, sections, window and door details, construction details, joinery and fitting details.
  • Documentation also includes a job specific specification with supporting technical literature. 
  • Tendering requirements and Conditions of Contract may also be included.

Tendering 

  • Selecting tenderers or negotiating with one contractor. Issuing of tender documents and dealing with any questions during the tender period. Closing tenders with a comparative analysis report submitted to the client with a recommendation of whom to select. 

Contract Administration

  • Running and recording of scheduled site meetings. Attending to any design or construction queries during the build. Issuing and processing of any contract variations. Final inspection undertaken at the end of the contract works. Issuing of a defects list. Issuing of a practical completion certificate. Ensuring all defects are rectified with the defects liability period

Edit Contact Details

by {{ libraryPage.pHolder.Title }}

Update the details that customers can use to find you.

These details will appear on the Contact page as well as at the bottom of all of your pages on ArchiPro.

General Settings


Notification Settings

Email Monthly Reports to:
Email Direct Enquiries to:
{{ libraryPage.pHolder.Professional.Title}}

Architectural Designer

Taylored Spaces

Taylored Spaces services are outlined below and include the various stages of the design process, each of which requires the clients sign off prior to the next stage commencing. 
Each stage requires various degrees of input from each party. 

The office utilises Archicad CAD software.

Nathan Taylor is a Licensed Building Practitioner - Design Category 3. 
 

Initial meeting 

  • Meeting to establish the design brief including the client’s budget, timeframe and services required. The initial meeting will provide the scope of work and enable Taylored Spaces to provide a fee offer.

Concept

  • Before initiating concept drawings, town planning requirements are investigated to highlight any restrictions and resource consent requirements. Once established a sketch scheme including plans and elevations is produced matched to the design brief.

Developed Design

  • Further development of the concept drawings allowing the client to visual their project including 3D renders preliminary cross sections and confirming the construction methodology and materials. The developed design documentation will provide enough detail for a quantity surveyor or building contractor to review to ensure the budget aligns with the design.

Documentation

  • Preparation of the construction documentation for submission to the local territorial authority and building contractors. Working drawings including but not limited to site, floor, ceiling and finishes plans, elevations, sections, window and door details, construction details, joinery and fitting details.
  • Documentation also includes a job specific specification with supporting technical literature. 
  • Tendering requirements and Conditions of Contract may also be included.

Tendering 

  • Selecting tenderers or negotiating with one contractor. Issuing of tender documents and dealing with any questions during the tender period. Closing tenders with a comparative analysis report submitted to the client with a recommendation of whom to select. 

Contract Administration

  • Running and recording of scheduled site meetings. Attending to any design or construction queries during the build. Issuing and processing of any contract variations. Final inspection undertaken at the end of the contract works. Issuing of a defects list. Issuing of a practical completion certificate. Ensuring all defects are rectified with the defects liability period

Read more...

Search Tags (max. 10)

  • taylored
  • spaces
  • architectural
  • designer
  • otago
  • dunedin
Services
  • Architectural Design

Our Team

Testimonials

ADMIN

Set Categories

{{libraryPage.pHolder.Categories.length}} {{libraryPage.pHolder.Categories.length == 1 && 'Category' || 'Categories' }}

{{ libraryPage.pHolder.InLibrary=='1' && "In professional Directory" || "Hidden from Directory" }}

{{libraryPage.pHolder.InLibrary=='1' && 'In Directory' || 'Profile Only' }}

{{ libraryPage.pHolder.ProjectsAllowed=='1' && "Can create Projects" || "Can't create Projects" }}

Projects

{{ libraryPage.pHolder.ProductsAllowed=='1' && "Can create Products" || "Can't create Products" }}

Products

{{ archipro.changes_saving==0 && "All changes saved." || "Saving changes..." }}

Saved! Saving...

ArchiPro Video Guides

Help

Leave Edit Mode

Finish Editing

{{ libraryPage.pHolder.Disable=='1' && "Enable all pages" || "Disable all pages" }}

{{ libraryPage.pHolder.Disable=='1' && "DISABLED" || "Disable all" }}

Enter Edit Mode

Edit Page