Easypell Pellet Boiler Home Installation Christchurch - Apricus Eco Hot Water & Heating | ArchiPro NZ

Easypell Pellet Boiler Home Installation Christchurch

  • Private home, Christchurch
  • Easypell 20kW boiler with 165kg on board hopper
  • Connected to home central heating system with radiators
  • Installed by H2Flow Plumbing, Christchurch
  • Weather compensated boiler output control with on board sensor
  • PWM Wilo high-efficiency pump
  • Heating system control using external thermostat & controller

Feedback from the Jonathon Toulson, Wai Tapu Contrators, Christchurch pellet boiler installer.

"The system went together really easily and was a breeze to set up. The controls are easy to use and the setup is clear. Once all the inputs, like the pump and sensors, were connected to the boiler it recognised all the components and we got them functioning with a few clicks on the controller.
The boiler worked as soon as the basic programme was set.

We were really surprised at how clean-burning the boiler is. We went outside to look for smoke from the flue but there wasn’t any so we thought maybe the boiler had stopped. Going back inside the house we checked it was still operating and sure enough the boiler was heating at 100% capacity and there was no flue gas visible from the chimney.

We are REALLY excited about these boilers!"

Message pro
Visit website
Contact details