Let’s start with something easy. With your lawn area already edged, knowing the total area will be handy for getting what’s needed; be it soil conditioners, fertiliser or the lawn itself. Simply measure and calculate this or with irregularly shaped lawns, drag your foot along or use marking paint to create a grid of squares — sides of 1m — on the ground. Add them up, grouping the incomplete squares in your head as you go to get a pretty good idea of the square meterage involved. When you order the turf itself, order 10% more than that to be sure you have enough.
A simple understanding of the ground at your place is a great starting point. Is it lose and sandy, hard and compacted or more like a loamy clay? This will determine what you add to bring it to a good condition for your lawn to feel loved. For sandy soil that is common for many coastal areas, you want to improve the water and nutrient holding capabilities of your base with appropriate soil improvers. In heavier soils you may need to focus on loosening things up with soil conditioner introduced and worked in (say 100mm thick). Hiring a tilling machine is a great way to get it done with a minimum of fuss.
Also, consider the finishing height of your lawn. Knowing the thickness of the turf beforehand will be handy (turf varieties will differ), but generally allow around 40-50mm between the base sand and the top of the edge. Getting this right will leave some edge to trim against later as your lawn flourishes!
A lawn that enjoys even watering is going to be the happiest. Consider drainage and water flow when preparing the base such that water doesn’t pool in one area or flow towards buildings. If the soil is sandy, it’s more about adding clays or other water-holding products to keep it there!
A properly set up reticulation system will make water management easy for you in the years ahead. If this is not your thing, call in an expert to make sure you get this right or work closely with a quality reticulation supplier who can walk you through the installation from your plan.
Having added what’s needed to improve the growing conditions, providing a nourishing feed for your lawn is key too. Find a starter fertiliser to encourage deeper root growth and really support your lawn in the establishment phase, scatter it evenly across the levelled area.
Rolling your surface now is a great idea to keep it firm and level, but be careful not to make it too compact, you don’t want a hard surface that is difficult for the turf to establish its roots into. Wet it down now and you’re ready to lay your lawn.
Of course you’ve timed the delivery time perfectly… here comes the truck!
Laying the lawn is the most rewarding part. It’s fun to do with friends helping out if you want it to happen quickly. Here’s some tips on laying the turf :
Once the layer is complete and you’d done a quick tidy, compact once across the top to give a professional-looking finish. Soak the turf now and maintain moisture until the roots have taken hold such that the turf cannot be lifted. This establishment phase is critical for a resilient lawn, depending on the season you should be watering deeply every day for the first 3 weeks.
Get the best aftercare advice for your area and season by speaking with your local Lawn Solutions Australia accredited turf supplier or accessing their advice online.
Thanks to Lawn Solutions Australia, with help from Jason Hodges, for helping us put this info together for you.