50mm x 19mm x 100mm Cavity to Non Cavity RDCNS150

By Masons
Website

Cavity to Non Cavity Soakers is designed to be installed behind a vertical cladding junction in a situation where one cladding has a cavity and the other is fixed directly to the stud. The flashing is designed to prevent water intrusion and creates a drainage plane should the seal fail.

Details
  • Category
    Flashing Penetrations
  • Range
    Internal Flashings
Specifications

Redway uPVC Back Flashings are available in 3 sizes (50mm x 19mm x50mm, 50mm x 42mm x 50mm, and 50mm x 19mm x 100mm) with all profiles supplied in 2.7m lengths.

Internal Flashings

Internal flashings to deflect & drain moisture at key joints & penetrations.

While leaks primarily occur around windows and doors, they also occur at other joints and penetrations of the cladding and trim. The NZBC, therefore, requires flashings to be installed in order to ensure weather tightness and maintain the overall health of the building.  Internal flashings provide a moisture barrier and drainage plane that prevent moisture build-up and deflect moisture to the building exterior.  All Redway Internal flashings are manufactured from corrosion-resistant, UV-protected uPVC, and are available from all leading building merchants.

MATERIALS:

  • All Internal Flashings are manufactured from rigid uPVC and are supplied in 2.7m lengths unless stated otherwise.
  • All products are biologically and chemically resistant to treated materials such as framing timber. They will not rust nor react in salt zones.
  • The uPVC compound is stabilised for UV protection as required by the NZBC.
  • It is lightweight allowing for easy transportation and installation.
Get in touch
For any enquiries regarding purchasing or using any of our products. Complete the contact form below, or call us on 0800 522 533.
Visit Website

About the
Seller

  • Products listed

    125

  • Recent Responsiveness

    86%

    Usually responds within
    8 hours on weekdays

Masons provide a range of quality trade building products from a complete Enclosure Building Wrap System and Exterior Cladding, to Brick Reinforcement, and are a crucial supplier in the New Zealand building industry.

Masons strive to be at the forefront of developing innovative products that raise the standards of New Zealand building products.