When water runs down a window, on a windy day it can often be blown back over the sill and into the cavity. To prevent this water from reaching the dry side of the cavity and potentially causing damage, the Redway Brick Kickout Flashing deflects this water and directs it to the wet side of the cavity, away from the building to drain clear.
Redway uPVC Back Flashings are available in 3 sizes (40mm, 135mm, and 160mm) with all profiles supplied in 2.7m lengths.
Each Back Flashing should be installed vertically behind the cladding joint.
Internal flashings to deflect & drain moisture at key joints & penetrations.
While leaks primarily occur around windows and doors, they also occur at other joints and penetrations of the cladding and trim. The NZBC, therefore, requires flashings to be installed in order to ensure weather tightness and maintain the overall health of the building. Internal flashings provide a moisture barrier and drainage plane that prevent moisture build-up and deflect moisture to the building exterior. All Redway Internal flashings are manufactured from corrosion-resistant, UV-protected uPVC, and are available from all leading building merchants.
MATERIALS:
Masons provide a range of quality trade building products from a complete Enclosure Building Wrap System and Exterior Cladding, to Brick Reinforcement, and are a crucial supplier in the New Zealand building industry.
Masons strive to be at the forefront of developing innovative products that raise the standards of New Zealand building products.