Aquanamel by Dulux

• Sizes - 2L, 4L, 10L
• Bases - white, deep, ultra deep, blue, bold yellow, extra bright, orange and true red bases
• Colour Range - Select from huge range of colours in-store
• Finish Sheen Level - Gloss, Semi Gloss, Low Sheen

Use

DULUX Aquanamel can be applied on properly prepared and primed/underocated paper faced wallboard, brick, set plaster, fibrous plaster, bare timber and previously painted surfaces. It is highly recommended for walls, doors, architraves, timber trim, and skirting boards as an alternative to enamels and is ideal for bathrooms, kitchens, and laundries.

Application Method

Roller, Brush, Airspray, Con-Spray.

Surface Preparation

All surfaces must be thoroughly cleaned and free of all loose dirt, dust, grease, loose or flaking paint, and loose surface plaster. Efflorescence or mould on masonry or concrete surfaces must be treated. Flatten gloss surfaces by thoroughly sanding and wipe clean with a damp cloth, then apply primer, sealer or undercoat as required. Do not sand between coats.

Clean Up

Water