Metallic Effects by Dulux

Use

DULUX Metallic Effects is suitable for exterior timber & masontry and for interior use on walls, doors, trim or furniture.

Application

Roller, Brush, Airspray, Con-Spray

Surface Preparation

DULUX Metallic effects can be applied over previously painted surfaces that are in good condition. For optimum appearance a perfectly smooth surface free of defects is required. Differences in surface gloss or variations in surface porosity can result in uneven colour and patchy appearance. Clean surface with sugar soap and remove any loose and flaking paint. Spot prime surfaces that have been filled and sanded. Glossy surfaces should be sanded to a dull finish prior to application. New surfaces should be cleaned and properly sealed with a suitable prepcoat. Metallic effects can then be applied directly over it. Note, new concrete, mortar or cement render must be allowed to cure for 4 to 8 weeks depending on concrete thickness and drying conditions.

Clean Up

Water