FPS® Weathertight® is certified to allow internal work to proceed to completion before the roof and wall cladding are installed (early close-in) 

Details
  • Category
    Waterproofing Membranes, Building Wraps & Underlays
  • Brand
    Fakro
  • Year
    2013
  • Warranty
    50 years
General
  • Type of use
    Commercial and Residential
  • Installation
    Professional installation required
  • Assembly
    Professional assembly required
Specifications

Eurotop W35

Size & Weight: (mm): 140, 50 x 2.75 = 137.5m²

Permeability: (G/m²/24h): 2300

Water Resistance: (mm): 2250

Eurotop N35

Size & Weight: (mm): 135, 50 x 1.5 = 75m²

Permeability: (G/m²/24h): 2900

Water Resistance: (mm): 5500

Max Wind Pressure: (Pa): 2341

Eurotop N15

Size & Weight: (mm): 115, 50 x 1.5 = 75m²

Permeability: (G/m²/24h): 2800

Water Resistance: (mm): 1500

Max Wind Pressure: (Pa): 2167

Eurotop S65

Size & Weight: (mm): 165, 50 x 1.5 = 75m²

Permeability: (G/m²/24h): 2300

Water Resistance: (mm): 2500

Max Wind Pressure: (Pa): 3332

Scope of use

Frame Protection System, FPS® Weathertight®™ system is a comprehensive roof and wall underlay system for timber and steel frame, panel and prefab building elements, providing both interim and permanent weather protection plus moisture control within the wall or roof structure. FPS® Weathertight™ is certified to allow internal work to proceed to completion
before the roof and wall cladding are installed.

Performance

The four essential requirements for Weathertightness: To allow work to progress inside before the exterior cladding is applied, a membrane must meet four minimum requirements; moisture control, waterproofing, wind proofing, fire retardant and UV exposure.

Frame Protection System
Frankton, Waikato
Get in touch
Visit Website

About the
Seller

Frame Protection System, FPS® Weathertight® system is a comprehensive roof and wall underlay system for timber and steel frame, panel and prefab building elements, providing both interim and permanent weather protection and moisture vapour control within the wall or roof structure.

FPS® Weathertight® is CodeMark certified to allow internal work to proceed to completion before the roof and wall claddings are installed.

In early 2011, Gwyn Williamson and Grant Murray, began sourcing underlays, tapes and fixing components for suitability to the NZ climate, local building methods and building performance. Frame Protection System Limited (FPS) was created in 2014 to bring their innovative, fully tested and CodeMark certified "system" to the building industry. Both Gwyn and Grant are proud that FPS® Weathertight® was the very first CodeMarked range of flexible underlay's in NZ to allow internal finishing work to proceed to completion before wall and/or roof claddings are fitted.  

Not only was it the first weathertight flexible underlay system, but because it went through 2 years of testing before being released, it has remained unchanged and still performs to a high standard today, ensuring nobody is going to be a guinea pig.