Stinger Cap & Staple Gun Range

By Frame Protection System
Visit Website

Stinger CH38-2 Cap & Staple Gun

Details
  • Category
    Fasteners & Fixings
  • Range
    FPS Weathertight
  • Brand
    Stinger
Scope of use

The Stinger Manual Cap & Staple Gun is the essential tool for efficiently fixing FPS Weathertights membranes. Specifically designed to release a plastic cap and staple with each strike, this manual gun operates similarly to a hammertacker. By incorporating this innovative tool into your workflow, you can significantly enhance the holding capacity of FPS membranes, enabling the use of N35 and W35 in Extra High and SED wind zones. Gun Specifications:

  • Tool Weight: 1.17 kg.
  • Fastener Capacity: 168 caps / 168 staples
  • Cap Type: Full 25mm plastic collated caps
  • Fastener Type: 10mm crown staples
  • Fastener Length: 10mm
Frame Protection System
View locations (2)
Visit Website

Other products
in this range

Eurotop N15 & N35 Roof/ Wall Underlay
Eurotop N15 & N35 Roof/ Wall Underlay
By Frame Protection System
Eurotop W35 Wall Underlay
Eurotop W35 Wall Underlay
By Frame Protection System
Euroband Tape Range
Euroband Tape Range
By Frame Protection System
Stinger Caps & Staples Range
Stinger Caps & Staples Range
By Frame Protection System
FPS Adhesive Seal Range
FPS Adhesive Seal Range
By Frame Protection System

About the
Seller

Frame Protection System, FPS® Weathertight® system is a comprehensive roof and wall underlay system for timber and steel frame, panel and prefab building elements, providing both interim and permanent weather protection and moisture vapour control within the wall or roof structure.

FPS® Weathertight® is CodeMark certified to allow internal work to proceed to completion before the roof and wall claddings are installed.

In early 2011, Gwyn Williamson and Grant Murray, began sourcing underlays, tapes and fixing components for suitability to the NZ climate, local building methods and building performance. Frame Protection System Limited (FPS) was created in 2014 to bring their innovative, fully tested and CodeMark certified "system" to the building industry. Both Gwyn and Grant are proud that FPS® Weathertight® was the very first CodeMarked range of flexible underlay's in NZ to allow internal finishing work to proceed to completion before wall and/or roof claddings are fitted.  

Not only was it the first weathertight flexible underlay system, but because it went through 2 years of testing before being released, it has remained unchanged and still performs to a high standard today, ensuring nobody is going to be a guinea pig.