Grooved Radiata Plywood | Wall & Ceiling Linings

Plymasters

Grooved Radiata Pine is manufactured from selected Pine veneer. The veneer is rotary cut. 

It meets the NZ Building Code, and is from renewable plantations. The clear face appearance grade makes this very popular in cabinetry and lining ply alike. Grooves are 100mm centres but other options can be custom done on request.

Details
  • Category
    Timber, Cabinets & Cupboards, Wall & Ceiling Finishes
  • Range
    Construction Plywood
Specs / Details

Scope of Use

  • Residential wall and ceilings
  • Commercial and classroom linings
  • Shop fittings
  • Joinery
  • Garage and sleep-out linings

 

Limitations on Use

  • F8 structural available on request 
  • Pine ply is a softwood — note handing and storage instructions:

Plywood is a natural product that can be affected by changes in weather conditions: moisture and temperature. Increased moisture content temperature variation may cause internal stresses causing previously flat sheets to bow. At Plymasters precautions are taken to minimise this effect. However, once the plywood has left the warehouse Plymasters cannot guarantee sheets to remain flat unless fastened. This is particularly important with pine ply (as it is a softwood) where free standing kitchen/cabinet doors are concerned. When storing panels, stack on a firm raised base with enough support to prevent sagging. Cover the pallet to protect top and edges.

 

Other Performance Attributes

  • Can be UT or H3.1 LOSP treated 
  • F8 structural available on request 
Key Features
  • Grooved at 100mm centres 
  • 7, 9 or 12mm available 
  • Comes in CD or SD 
  • Can be UT or H3.1 LOSP treated 
Let us know how we can help you achieve our plywood and panel dreams!
Visit Website

About the
Seller

Plymasters