HB2247 600mm Off-Set D Pull
The new HB2247 600mm off-set pull handles are manufactured from solid brass to provide a classic look for glass, timber, and aluminium doors. These pulls can be used as through fix, back to back pairs, and have fittings for use on glass doors. The addition of the HB2260 Knob provides both a finishing detail, and can be used similar to a cabinet knob when the pull is required to one side of the door only.
Our D Pulls are fabricated from solid brass, and as such they are heavy. For cabinetry thickness doors (18-25mm) where a pull is required to one side of a door or drawer only, we recommend using shorter lengths, or for longer lengths using the through fix sets for optimum stability. We advise installing the optional flange/rose on all single side fixing, and on installations into soft woods such as cedar and pine.
Please note: these pulls are fabricated from solid brass bar, and as such are heavy items (1-2.5kgs each) and not specifically designed for 18-24mm cabinetry doors. If you are looking at using these on cabinetry the Face Fix option will not suitable. For this application please use the Through Fix sets which have an additional matching “cap” on the inside of the door to hold handles secure.
- CategoryPull Handles
More from
Halliday + Baillie
About the
Seller
Halliday + Baillie has been providing elegant handle solutions and architectural hardware products for over 25 years and designing and making their own hardware for almost two decades.
All our Halliday + Baillie products are proudly designed and manufactured in New Zealand. Support local and buy NZ-made!
Our design encompasses quality, flair, functionality, and longevity. Products are proudly produced in New Zealand, where lower volumes enable careful monitoring with high production quality. Handles may be turned a thousand times daily, so materials and finish are among the highest priorities. Longevity has become the undisputed hallmark of our success.
The range includes door hardware, sliding door hardware (including a full range of flush pulls, end pulls, locking and privacy sets etc), stair rail brackets, door stops, drawer and blind extrusions and wet area vents.
Halliday + Baillie architectural hardware products look good and feel good, and the team is continually striving for an aesthetic that will stand the test of time.
Besides our products, Halliday + Baillie is the exclusive New Zealand and Australia supplier for the German FSB range and the English Turnstyle Design Ranges of high-quality architectural hardware. Solid bronze, marine-grade stainless steel, and hand-stitched lever handles and knobs are just part of these extensive ranges.
- ArchiPro Member since2019
- LocationView address
- More information