HB547 Solid Brass Stair Rail Bracket
Halliday + Baillie
The HB547 is a stunning unlacquered solid brass bracket that draws inspiration from the popular HB590 bronze model. Its elegant design sets it apart and it will only become more beautiful with age, developing a graceful patina over time. The solid brass material ensures durability and high-quality craftsmanship. It’s truly in a class of its own.
- CategoryStair Rail Brackets
- BrandHalliday + Baillie
- DesignerHalliday + Baillie
- Year2024
- Warranty5 years
- Country of originNew Zealand
- Type of useCommercial and Residential
- Care and cleaningEasy maintenance
- InstallationProfessional installation required
- AssemblyProfessional assembly recommended
Material: Milled solid brass
Suitable for: Interior or exterior use (will age quickly outside)
Minimum suggested spacing : 600mm Maximum suggested spacing : 800mm
The HB547 bracket is specifically designed for cylindrical rails with a diameter of 40-50mm. It is suitable for both interior and covered exterior situations, making it versatile for various applications. Additionally, this bracket can be used with square or rectangular profile timber balustrades if the top curved seat is routed into the wood. This flexibility allows for creative and customized installations.
Includes all fasteners including anchor for concrete, masonry or wood framed plasterboard walls. Epoxy not included.
Our brackets have been tested and comply with AS/NZ1170. 1:2022 Structural Design Action Standards, and the International Building Code (IBC 2003) 200lb fall rating. In addition, all of our brackets work within the New Zealand Building Code Acceptable Solutions D1/AS1 Access Routes, depending on the balustrade used.
More from Halliday + Baillie
About the
Seller
Halliday + Baillie has been providing elegant handle solutions and architectural hardware products for over 25 years and designing and making their own hardware for almost two decades.
All our Halliday + Baillie products are proudly designed and manufactured in New Zealand. Support local and buy NZ-made!
Our design encompasses quality, flair, functionality, and longevity. Products are proudly produced in New Zealand, where lower volumes enable careful monitoring with high production quality. Handles may be turned a thousand times daily, so materials and finish are among the highest priorities. Longevity has become the undisputed hallmark of our success.
The range includes door hardware, sliding door hardware (including a full range of flush pulls, end pulls, locking and privacy sets etc), stair rail brackets, door stops, drawer and blind extrusions and wet area vents.
Halliday + Baillie architectural hardware products look good and feel good, and the team is continually striving for an aesthetic that will stand the test of time.
Besides our products, Halliday + Baillie is the exclusive New Zealand and Australia supplier for the German FSB range and the English Turnstyle Design Ranges of high-quality architectural hardware. Solid bronze, marine-grade stainless steel, and hand-stitched lever handles and knobs are just part of these extensive ranges.
- ArchiPro Member since2019
- LocationView address
- More information
Halliday + Baillie