MTC is an electronic heating thermostat designed to be installed in a standard single gang electrical box with a minimum width of 2-1⁄4”. Once installed, it requires no maintenance.
An LED illuminates to indicate a call“ for heating, this also aids in system testing. An ON/OFF selector switch on the front of the cover makes system operation is extremely simple.
Technical Data:
Floor Sensor Installation:
The sensor shall be mounted in a conduit which should be sealed and placed as high as possible in the concrete, etc. The sensor wiring may be extended up to 150’ (50 m) using 18 gauge wire and the wiring resistance shall not exceed 20 ohms. Sensor wires must be kept in a separate conduit, away from all other wirings. The sensor and wires must be protected from damage during the installation. If the shielded wire is used, it must not be grounded but connected to terminal 6 on the thermostat.
MTC is an electronic heating thermostat designed to be installed in a standard single gang electrical box with a minimum width of 2-1⁄4”. Once installed, it requires no maintenance.
Coldbuster Floor Heating is the leading supplier of electric floor heating Australia-wide supplying a range of floor heating and related heating products to the trade, retail and DIY markets.
With over 27 years experience, we import and distribute only the best quality products manufactured by top international companies that invest substantial funds in new product Research and Development in consultation with Coldbuster, ensuring leading-edge technology.
Our products meet European quality standards and have ISO certification and USA Underwriters Laboratory listings. The products meet Australian standards regarding volatile organic compounds and electromagnetic radiation.