Multipak Gas Continuous Flow Water Heaters
by Rheem
Auckland, New Zealand
- 199.1K profile views
- 35 saves
A staged ignition system available pre-plumbed and on a frame with two to six Commercial Continuous Flow Units. Typically used where large demands are required intermittently such as in sports clubs. In 60°C temperature mode, Multipak is suitable for use in dead leg and reticulation systems.
- 84% thermal efficiency heat source 6 Star heat source
- Vitreous enamel storage tank up to 82°C operation
- Large flow 50mm storage tank fittings
- Digital temperature display
- Indoor and outdoor models available
Tags
Product Details
- Product
- Multipak Gas Continuous Flow Water Heaters
- Category
- Gas Water Heaters
- Sold by
- Rheem
Rheem is specified by
Hurley ArchitectsArchitects
BOONArchitects
Condon Scott ArchitectsArchitects
Studio Brick ArchitectsArchitects
Origin HeritageArchitects
Johnston ArchitectsArchitects
106 ArchitectsArchitects
RB StudioArchitects
Dalman ArchitectsArchitects
Jack McKinney ArchitectsArchitects
AD ArchitectureArchitectural Designers
RCPProject Managers
Emandee HomesBuilders
Cogan Custom HomesBuilders
Landmark Homes Auckland - North Shore & RodneyBuilders
VitruvionConstruction
Hallmark HomesDesign & Build
A staged ignition system available pre-plumbed and on a frame with two to six Commercial Continuous Flow Units.
Typically used where large demands are required intermittently such as in sports clubs. In 60°C temperature mode, Multipak is suitable for use in dead leg and reticulation systems.
- 84% thermal efficiency heat source 6 Star heat source
- Vitreous enamel storage tank up to 82°C operation
- Large flow 50mm storage tank fittings
- Digital temperature display
- Indoor and outdoor models available
- Specs / Details
Available in the following model configurations:
- Multipak MPI02 | 27 L/min Max Flow Rate at 50°C Rise | Indoor Installation
- Multipak MPE02 | 27 L/min Max Flow Rate at 50°C Rise | Outdoor Installation
- Multipak MPI03 | 41 L/min Max Flow Rate at 50°C Rise | Indoor Installation
- Multipak MPE03 | 41 L/min Max Flow Rate at 50°C Rise | Outdoor Installation
- Multipak MPI04 | 54 L/min Max Flow Rate at 50°C Rise | Indoor Installation
- Multipak MPE04 | 54 L/min Max Flow Rate at 50°C Rise | Outdoor Installation
- Multipak MPI05 | 68 L/min Max Flow Rate at 50°C Rise | Indoor Installation
- Multipak MPE05 | 68 L/min Max Flow Rate at 50°C Rise | Outdoor Installation
- Multipak MPI06 | 81 L/min Max Flow Rate at 50°C Rise | Indoor Installation
- Multipak MPE06 | 81 L/min Max Flow Rate at 50°C Rise | Outdoor Installation
Downloads
Downloads (4)4 Direct downloads • 11 Available on request
Frequently asked questions about
Multipak Gas Continuous Flow Water Heaters
The Multipak Gas Continuous Flow Water Heaters is supplied by Rheem. It is also on their website, and you can browse every product Rheem lists on ArchiPro.
Rheem does not publish a price for the Multipak Gas Continuous Flow Water Heaters on ArchiPro. for pricing, or visit their website.
It is listed under Gas Water Heaters on ArchiPro, where you can compare it with gas water heaters from other suppliers.
Yes. It is part of the Gas Continuous Flow Water Heater range from Rheem, where you can see every product in the range together.
from this page, see their contact details on ArchiPro, or visit their website. The Rheem profile on ArchiPro has the rest of their products.
More products from
Rheem
The rest of this range, and everything else Rheem makes.
More in
Gas Water Heaters
Everything else in Gas Water Heaters, from every supplier on ArchiPro.
