READY Glow

Material Profile

READY Glow is a high performance, non-toxic, photo luminescent aggregate specifically formulated for use with decorative concrete.

Non - radioactive

• Non-toxic and safe for use in all types of environments.

Outstanding luminosity

• Exposure to 40 seconds of direct sunlight produces an afterglow of over 15+ hrs.
• Exposure to daylight (indirect sunlight) for 8 minutes produces an afterglow of up to 15+ hrs.
• Exposure to artificial light such as Halogen or Fluorescent for approximately 10 - 30 minutes produces an afterglow of up to 15+ hours.

Performance

• The luminosity of the aggregates is dependent on actual particle size and can reach an initial intensity burst of 3612 mcd/m2 @ 1 minute and then begin degrading once removed from light source.

Stability of physical and chemical properties

• READY Glow works between +500 degrees Celsius and -30 Degrees Celsius.
• It is resistant to high and/or extended exposure to ultraviolet radiation and does not discolour under 300-watt high mercury lamp or 1000 hours at 35 Degrees Celsius -40 Degrees Celsius, 80% humidity.
• READY Glow is unaffected by most chemicals and performs even in the worst outdoor conditions.
• Ready Glow stones DO NOT expand or contract in concrete or any other substrate.

READY Glow is a high performance, non-toxic, photo luminescent aggregate specifically formulated for use with decorative concrete.

Non - radioactive

• Non-toxic and safe for use in all types of environments.

Outstanding luminosity

• Exposure to 40 seconds of direct sunlight produces an afterglow of over 15+ hrs.
• Exposure to daylight (indirect sunlight) for 8 minutes produces an afterglow of up to 15+ hrs.
• Exposure to artificial light such as Halogen or Fluorescent for approximately 10 - 30 minutes produces an afterglow of up to 15+ hours.

Performance

• The luminosity of the aggregates is dependent on actual particle size and can reach an initial intensity burst of 3612 mcd/m2 @ 1 minute and then begin degrading once removed from light source.

Stability of physical and chemical properties

• READY Glow works between +500 degrees Celsius and -30 Degrees Celsius.
• It is resistant to high and/or extended exposure to ultraviolet radiation and does not discolour under 300-watt high mercury lamp or 1000 hours at 35 Degrees Celsius -40 Degrees Celsius, 80% humidity.
• READY Glow is unaffected by most chemicals and performs even in the worst outdoor conditions.
• Ready Glow stones DO NOT expand or contract in concrete or any other substrate.

READY Glow products can be used in various applications including but not limited to the following:

• Hand-broadcasted/seeded onto concrete surfaces similar to seeding colour flakes and recycled glass.
• Used inside of your formwork by spraying adhesive on the inside of your formwork then seeding with READY Glow stones.
• Mixed directly into overlay mixes.

READY Glow is available exclusively to Allied Concrete and Ashby's Ready Mixed customers only.

Stones are sold in pre-bagged 100g quantities. To order, please contact your local plant and advise at the time of concrete booking.

All READY Glow orders require a minimum lead time to supply of 5 working days, subject to availability. Orders can be collected from your local plant.