Revita™ | Self Cleaning Glass

Revita™ is float glass with a special pyrolytic coating which works in two stages.

Specs

Revita™ is a self cleaning coating that should be used in combination with Woods Glass solar control range such as ThermalPlus™ and Infinit E™ to optimise performance. All glass must be engineered to specific code and design, please contact Woods Glass to find out more information.

CLEANING/MAINTENANCE

Regular cleaning of Revita should not usually be necessary, however, certain pollutants and extended dry periods can cause a build up of contaminants on the glass surface. Normally when cleaning glass, a vinegar-based glass cleaner or mild dish soap and water with a soft, lint-free cloth or paper products is recommended. A squeegee or soft cloth may be carefully used to dry the glass and help avoid water spots.

It is not recommended to use petroleum-based cleaners or solvents as they can streak the glass and weaken the seal between the glass and frame. Avoid washing in direct sunlight to reduce streaking on the glass.

Never use razor blades, steel wool, putty knives or abrasive pads as they may damage the glass, particularly on toughened glass.

RANGE

Revita is a coating that can be applied to many different Woods Glass products such as our Laminated, Toughened and Low-E products. It can be included in an insulating glass unit and the limit on size is only due to the engineering requirements of the glazing system. Please contact Woods Glass to discuss special requirements.