Salice Exedra2 Bifolding Pocket Door

By FIT
Website

Salice's Exedra 2 Pocket Doors are designed and made in Italy. It’s a patented mechanism that moves two joined doors simultaneously. Exedra 2 optimises space in many applications: walk-in wardrobes, pantries and sculleries, storage areas and work from home spaces.

The whole mechanism is self-supporting and fixed to the side of the cabinet; there are no load-bearing frontal profiles on either the top or bottom of the cabinet, thus eliminating any need for additional central supports. 

Thanks to the motion-control system, flush handles can be fixed at the edges of the doors, allowing effortless opening and closing with one hand. Furthermore, with the aid of the electric Push kit, it is possible to use both versions on handle-less furniture. 

Exterior surfaces of doors are protected throughout the opening and closing motions.

Exedra 2 is available in 2 models: SMART – panel edges are visible when the door is folded back into the cabinet pocket and STAR – where a handled front panel sits across the cabinet pocket opening.

Salice Exedra 2 Smart and Star pocket doors are custom made for you in Italy, then shipped to FIT. You need to allow plenty of time, but it will be worth the effort of planning!

Details
  • Category
    Sliding Door Gear
  • Brand
    Salice
  • Warranty
    Lifetime
General
  • Country of origin
    Italy
  • Type of use
    Commercial and Residential
  • Installation
    Professional installation recommended
  • Assembly
    Professional assembly recommended
Specifications

Exedra2 Smart

  • Suits doors from 18mm to 25mm thick
  • Suits door heights from 1800mm to 2600mm
  • Maximum weight per door: 50kg (25kg per door panel)
  • Suits doors from 550mm to 850m wide (per panel)
  • Minimum cabinet depth: 630mm
  • Required internal pocket width: 180mm
  • Required door panel gaps: 3mm
  • Minimum side panel thickness: 18mm
  • Vertical adjustment ± 5 mm
  • Horizontal adjustment ± 3.5 mm
  • Front adjustment: - upper ± 3 mm and lower ± 2 mm

Exedra2 Star

  • Suits doors from 18mm to 25mm thick
  • Suits door heights from 1800mm to 2600mm
  • Maximum weight per door: 50kg (25kg per door panel))
  • Suits doors from 450mm to 750m wide (per panel)
  • Minimum cabinet depth: 730mm
  • Required door panel gaps: 3mm
  • Minimum side panel thickness: 18mm
  • Vertical adjustment ± 5 mm
  • Horizontal adjustment ± 3.5 mm
  • Front adjustment: - upper ± 3 mm and lower ± 2 mm
Scope of use

Designed to be installed into cabinetry in domestic kitchen, laundry or similar. Also appropriate for office and light commercial use.

This unit is sold exclusive of cabinet. It is a technical product and is designed to be installed into your cabinet by a kitchen maker, cabinetmaker or joiner. 

Salice Exedra 2 Smart and Star pocket doors are custom made for you in Italy, then shipped to FIT. You need to allow plenty of time, but it will be worth the effort of planning!

Features
  • Self-supporting mechanism fixes to the side of the cabinet
  • No load-bearing frontal profiles on top or bottom of the cabinet, so no need for additional central supports.
  • Motion-control system means flush handles can be fixed at the edges of the doors, allowing effortless opening and closing with one hand.
  • With the aid of the electric Push kit, it is possible to use both versions on handle-less furniture.
  • SMART model - Folds back into cabinet leaving door panel edges visible.
  • SMART model - Enables door panel sizes to be consistent and equal across the cabinet face
  • STAR model - Completely hides door panels behind a cover panel, whether doors are open or closed.
Performance

For warranty details, please refer to the Performance Documents subsection of the Downloads section on this product.

Get in touch
Visit Website

About the
Seller

  • Products listed

    90

  • Recent Responsiveness

    100%

    Usually responds within
    24 hours on weekdays

Fit delivers innovative storage solutions for kitchens and homes to maximise space and workflow efficiency such as pull out kitchen waste bins and laundry baskets, drawer and cabinet organisers and soft close and push to open drawer and door systems. All products have been comprehensively tested for durability and performance and are backed by warranty that lasts as long as the cabinetry the product is installed into. 

We are 100 per cent dedicated to delivering intelligent, innovative, functional products and solutions backed with excellent, caring service and support. 

Fit deliver nationwide to kitchen makers, cabinet makers, joiners, designers, specifiers, architects and to keen homeowners. 

We team with leading designers and manufacturers globally - such as VAUTH-SAGEL for kitchen storage hardware, AMBOS for wardrobe systems, KINGSLIDE for drawer systems and runners, DOMUS Line™ for LED lighting and SALICE for hinges and door systems - all of whom are at the forefront of kitchen technology.

Our TANOVA kitchen bin, laundry unit and ventilated drawer ranges are designed, developed and assembled right here in New Zealand by the Fit team. TANOVA laundry and drawer ranges, and a substantial portion of the kitchen bin range (models with 20L and/or 36L buckets/baskets), also holding New Zealand Made certification.

Intelligent Solutions and People That Care

FIT's office and one distribution facility are based in Wellsford, an hour or so north of Auckland, with a second distribution centre and a showroom in Christchurch. We're Kiwi owned and operated and we have a robust team of more than 20 full time employees, with customer champions covering every area of New Zealand on a regular basis.