Timbacryl by Dulux

• Sizes - 1L, 4L, 10L
• Bases - Vivid white, deep, ultra deep, blue, brown, brunswick cherrywood, conifer, ebony, green, grey, karaka leaf, mission brown, ochre, redwood, yellow
• Colour Range - Colour chart available in store. Can be tinted to a wide range of colours.
• Finish Sheen Level - Low Sheen

Use

DULUX Timbacryl is a long lasting low sheen 100% acrylic finish for exterior timber, ideal for fences and pergolas.

Application

Roller, Brush, Airspray, Con-Spray.

Surface Application

All surfaces must be thoroughly cleaned and free of all dirt, dust, grease, loose or flaking paint. Metal surfaces should be free of rust, salts & any signs of corrosion. Efflorescence or mould on masonry or concrete surfaces must be treated. Occasionally an apparently sound old paint will lose adhesion when recoated, particularly if the new paint is darker in colour. To avoid this, check the adhesion of the old paint by cutting an 'X' through a clean area of the film with a sharp knife, press cellulose tape firmly across the cut and rip it off. If the old paint comes off with the tape it should be removed before repainting.

Clean Up

Water