Triclad Lapped Weatherboards

By Triclad
Website

Triclad Weatherboards are manufactured from either 12.5mm or 17.5mm thick bandsawn face plywood sheets H3.1 treated and factory joined to create 4.8mm lengths.   

The weatherboards boards are designed to be lapped and have weather grooves in the back face.                                                                                                                                                                                                                                                                                                                                                                                       

Details
  • Category
    Cladding & Facades
Scope of use

Residential and light commercial cladding

Features

Bandsawn

Specs / Details

All weatherboards are either 2.4m or 4.8m long and available in the following thicknesses and widths: 

12.5mm thick – 145mm, 190mm, 230mm,

17.5mm thick – 145mm, 190mm, 230mm, 260mm, 295mm

The Triclad Lapped Weatherboard System has been appraised by BRANZ with Apprasal Certificate 1062 (2020) pending

Get in touch
Visit Website

About the
Seller

  • Products listed

    3

  • Recent Responsiveness

    100%

    Usually responds within
    5 days on weekdays

The Triclad range of exterior bandsawm cladding products adds a natural timber beauty and charm to any building project.

Triclad markets three ranges of bandsawn exterior cladding products.

  • Plywood based Enduroclad Board and Batten System
  • Plywood based Triclad Lapped Weatherboard system
  • Finger jointed pine Bandsawn bevel back and shiplap weatherboard systems

All are manufactured from timbers grown from sustainable and managed plantation pine forests right here in New Zealand with the plywood based systems appraised by BRANZ to comply with New Zealand Building Code requirements.