Vitex Decking Wood

Available sizes:

• 140x19mm
• 90x19mm
• Other sizes can be machined to create custom profiles

The decking boards must be installed over a structural frame with a joist spacing maximum of 450mm centres with a fastening that meets the requirements of NZS3604:2011, sec5on 4. The decking may be installed in all exposure zones as defined in NZS3604:2011, where microclimatic conditions apply contact the supplier for technical advice. The decking must be installed on timber or lightweight steel structural framing that complies with the NZ Building Code.

Before undertaking any construction work you must consult with your local authority to check that any construction requirements are met and to determine if a Building Consent is required. A qualified tradesman should be consulted where expert services may be required.

• Fine, slightly lustrous texture with even grain
• Leathery odour and nice to the touch - perfect for bare children's feet!
• Sourced from low-impact, village-based operations in the Solomon Islands
• High resistance to shock loads

The timber is converted without difficulty. It planes and machines well and is easy to cut across the grain. A good finish can be obtained and it has good bending qualities and holds nails well and without pre-drilling. 

• ITM Stores nationwide
• Carters

• Decks
• Exterior Joinery
• Board Walks
• Boat Building