House wrap strapping to prevent building wrap from bulging
WrapStrap™ – House wrap strapping, is a Polythene embossed strap that is installed around the building wrap to keep the insulation in place and prevent it from bulging into the cavity for buildings with a drained cavity application
As per NZBC The Buildingwrap requires to be restrained from bulging into a drained cavity where stud spacings are greater than 450 mm. This to prevent the building wrap and insulation from protruding into the drained cavity. Acceptable means of achieving this are by using: WrapStrap at 300 mm centres fixed horizontally and drawn taut. WrapStrap™ can also be used as a support for non-self supporting roof underlay.
- CategoryInsulation
- RangeBuilding Products
OTHER PRODUCTS
IN THIS RANGE
About the
Seller
- Products listed
- Recent Responsiveness
86%
Usually responds within
8 hours on weekdays
Masons provide a range of quality trade building products from a complete Enclosure Building Wrap System and Exterior Cladding, to Brick Reinforcement, and are a crucial supplier in the New Zealand building industry.
Masons strive to be at the forefront of developing innovative products that raise the standards of New Zealand building products.