Construction Tools & Attachments

A corded power drill is used for planting holes in wood, plastics, metal, stone, brick, glass, concrete, and tiles. It typically comes with either a fixed speed setting, 2-speed settings, or a variety of options.  

Apart from drilling holes, this tool is also used as an electric screwdriver. Its key advantage is the absence of a power cord, making the tool independent from electric outlets. Also, this type of drill is very balanced and easy to use with one hand.

Also called impact or percussion drill, this power tool is used mainly for drilling holes in hard materials, with rapid succession.

As its name suggests, an air compressor concentrates energy (electric or gasoline) and releases it to perform different tasks. This air tool is typically used as the driving force of pneumatic tools such as jackhammers or nail guns. Its power and capacity vary depending on the specific manufacturer and model. 

Also known as a pneumatic drill or jackhammer, this tool combines a hammer and a chisel to break up rock or concrete pavement.

This air-powered tool is used to drive nails into wood or some suitable alternative kinds of material. Apart from compressed air, it can also be powered by an electromagnet and highly flammable gases. 

This hand tool with sharp blades is used predominantly for cutting wood. However, it typically features a variety of blades that can be used on other materials, such as metal or plastic. 

A high-powered electric saw can easily and quickly cut through thick timber. It delivers a more "square" cut than a simple jigsaw due to the stiffer blade. Also, it's better suited for cutting f boards.

This tool is slim and long, similar to a jigsaw in appearance. At the same time, it's high-powered with blades extending up to 200mm. Reciprocating saw is best controlled with both hands. 

Sander

Electric sanders are separated into two essential types: belt and orbital. While both are used for smoothing down wood and metal or removing layers of paint, there are some notable differences, too. 

• Belt sander: A motor-operated appliance with a continuous looped belt of sandpaper. 
• Orbital sander: This uses sheets of sandpaper rolled in a circular motion over the application surface. 

A concrete mixer is a machine with a rotating drum. It can be small or truck-sized. This tool is used for mixing cement with additives such as gravel or sand, turning the resulting compound into ready-to-pour concrete.

With a large diameter blade that produces an accurate square 90-degree cut, a circular saw is an essential tool in construction. Compound mitre saws perform signature mitre cuts, bevelled cuts, or a combination of the two.

An angle grinder is a reliable tool for cutting metal, plastic, masonry, and tiles, with an abrasive consumable disc. While most models can efficiently cut through timber, using the grinder to cut stone or concrete requires specialised abrasive or diamond disks.

Also called an impact gun, this tool operates by quickly releasing the stored energy from a rotation mass to the output shaft. The energy typically comes from compressed air; however, other power supplies and generators are also available. 

This is a modern power tool with a motor that drives an oscillating head. Several construction attachments and accessory types can be connected to and controlled by the head - from toothed blades to sanding pads. It's designed mainly for applications where standard saws can't be used. 

This building tool makes 90-degree and mitre cuts in metal bars and hollow metal segments.

Site safety matters and precautions are essential when dealing with power tools to prevent injuries. It's strongly recommended to always: 

• Check all featured instructions, guides, or manuals, and follow them strictly.
• Inspect the cables and electrical extensions before use, and ensure that nothing is damaged. Broken parts need to be replaced before using the tool.  
• It's not recommended to use corded tools around water or during the rain. Most corded power tools are not waterproof. 
• Adequate personal protective equipment is a must for minimising all risks. 

When buying construction tools for extensive practice, it's good to consider the professional series. They are designed to withstand daily usage, with more durable, resilient, and heavy-duty construction than ordinary models. Besides lasting longer, these units also pay off in maintenance and repairs - or, better said, the absence of such requirements.

If the tool is going to be used occasionally for minor house repairs and hobbies, a DIY model will suffice. 

The work zone needs adequate lighting and ample space to move around. Using a plugin adapter between the socket outlet and the power plug will further enhance the safety of use.     

Disks, blades or other parts of the building tools should never be replaced before disconnecting the unit from the power supply.