By MetWood®
Evoking sea and sand-weathered look to reflect this beautiful, sea-facing location, Ancient Grey Oak MetWood finish was specified for a fence and gate that gives privacy to a secluded area of the grounds.
Creating a wonderful, almost ‘Secret Garden’, this area feels like it’s just waiting to be discovered.
Black Wenge Metwood finish was used for the main entrance louvres providing a softer look than a traditional powder coated louvre, and overcoming the maintenance costs and issues associated with second floor timber solutions.
Black Wenge Metwood finish was used for the main gate and side gate that opens to the beach, to tie into the black timber fencing that surrounds the property, providing a durable aluminium solution to these frequently used openings.
Standard powder coating finishes applied by the Powder Coating Group can also be found throughout the house on facades, louvres, flashings, etc.
Natural-looking woodgrain finishes for interior & exterior aluminium architecture.
All the advantages of an aluminium product, with the warmth & beauty of wood.
Perfect for: Cladding, Louvres, Battens, Doors, Windows, Ceilings, Soffits, Screens, Awnings, Facades, Fencing, Pergolas, Partitioning
Warranty Available. Metwood is a two stage process of powder coating followed by sublimation. Through our suppliers, we are able to offer a 25 year warranty on the underlying powder coating from Interpon, and a 10 year warranty on the pattern from Menphis. Both warranties are subject to the specific terms and conditions of the respective suppliers.
*MetWood sublimates high-definition photographs of actual pieces of timber into a powder coating layer. This means that MetWood sublimated finishes exhibit all the natural variations of colour, grain and blemishes that are seen in real wood. It is possible there will be some shifting in colour over time, however, regardless of the extent of colour change, it won’t change in an ‘unnatural way’ so as to significantly adversely affect the appearance of the surface to which the product has been applied.
# Being a coating, Metwood doesn't alter the fire rating performance of a product, so when used on Aluminium, it can overcome many of the fire related issues associated with traditional wooden products, while providing the look of natural wood.
For further information please refer to our website or make a direct inquiry.