Does Weathertex Need to be Painted

Written by

Weathertex

18 September 2025

 • 

5 min read

Photographed By Atelier Photography

When it comes to exterior cladding, Weathertex cladding offers durability and style, but understanding the painting requirements is crucial for maintaining both its appearance and warranty. Whether you’re a homeowner, builder, or tradie, this guide will walk you through everything you need to know

Pre-Primed Weathertex: Painting is Essential

If you've chosen pre-primed Weathertex products for your project, here's what you absolutely need to know.

The 60-Day Rule You Can't Ignore

Weathertex factory primer is designed to be painted within 60 days of installation. Why is this timeline so important? The factory primer is designed as a base coat system, not a final finish. Beyond the 60-day window, the primer's ability to bond effectively with topcoat paints begins to deteriorate.

This can lead to:

  • Poor paint adhesion
  • Premature paint failure
  • Warranty may be voided

To prepare your pre-primed product surface for painting, we suggest cleaning the board with a soft broom or a soft, lint-free cloth and washing it down with sugar soap to remove salt, dust, dirt, and grease. Do not vigorously scrub the surface! Wash down with fresh water and dry the surface with one final wipe using a soft, dry, lint-free cloth in the direction of the paint flow.

aw43i4hw.jpeg

Option 1: Water-Based Deck Staining

For those who want colour control while maintaining the natural timber feel, water-based deck staining is an excellent choice.

Application Process:

  • Clean the Weathertex Natural products prior to staining using anoxalic-based deck cleaner using a soft broom and hose. DO NOT PRESSURE WASH the product as it may affect the overlay. Let the natural product dry completely prior to staining.
  • Minimum 2-3 coats are essential for proper coverage
  • Brush application is critical- this ensures the stain penetrates properly into the timber's textured surface
  • Apply your first coat, then perform cutting in to avoid unsightly dry-line borders
  • Always follow the stain manufacturer's specific application instructions

Pro Tip: Consider letting your Weathertex Natural lighten naturally before staining. This pre-weathering can create unique colour results that aren't achievable with fresh timber.

Colour Selection: Staining manufacturers offer an extensive range of colours, but here's what you must do: always perform a test sample first. This isn't optional - it's your insurance policy for colour expectations and performance. What looks perfect on a sample card might behave differently on your specific installation.

Option 2: Controlled Erosion Staining

This specialised staining system offers a unique approach to timber protection while allowing for natural character development over time. The application follows the manufacturer's specific instructions, and like traditional staining, you can pre-weather the timber for different colour outcomes. The same rule applies here: test samples are non-negotiable before committing to your entire installation and ensure the natural has been cleaned and completely dry before application

Perhaps the most distinctive characteristic of Weathertex Natural Range is its ability to weather beautifully without any coating at all.

4-gigapixel-low-resolution-v2-2000w.jpeg

Perhaps the most distinctive characteristic of Weathertex Natural Range is its ability to weather beautifully without any coating at all.(Please place image 4 here)Understanding Natural WeatheringWhat Happens Over Time: When left uncoated with consistent sun ( UV)exposure, your Weathertex Natural will undergo a beautiful transformation. The timber naturally lightens and develops that sought-after "grey off" appearance, like raw hardwood weathering.Factors Affecting Weathering:UV intensity - More sun means faster colour changeMoisture exposure - Affects the rate and evenness of weatheringConsistency of exposure - This is crucial for even results, e.g eaves, trees ect, limit exposure and will affect fading rates,Timber species mix – Try to purchase all of the natural product at the same time where possible Weathertex products offer excellent exterior cladding solutions, but success depends on understanding and following the specific requirements for each product type. Pre-primed products offer colour flexibility with painting obligations, while Natural Range products provide beauty that improves with age.

Before starting your project, always consult the latest installation manuals and consider consulting with painting professionals to ensure the best results. For detailed painting specifications and installation guidance, check our installation manuals and painting and staining tab on our website for supplier tech sheets that have been tested on Weathertex.

Please note Weathertex does not cover the coating itself. We recommend contacting the coating manufacturer for any applicable coating warranties and conditions.