Dulux® Protective Coatings provide an extensive selection of intumescent coatings for New Zealand.
These intumescent coatings safeguard structural steel during a fire. Steel loses its load-bearing capacity when its temperature exceeds 550ºC, but with an intumescent coating, the structural stability of the steel is better maintained in the event of fire.
Choosing the right intumescent coating is essential for both the construction phase and the end-use environment.
It's important to select the right intumescent coating for both the construction and end-use environment. Dulux Protective Coatings intumescent
Dulux® FIRETEX®
The Dulux FIRETEX® series includes coatings that offer between 60 and 120 minutes of cellulosic fire protection. These coatings are suitable for environments with atmospheric corrosivity levels ranging from C1 to C5, as specified in AS/NZS 2312.1:2014. The range encompasses choices for both interior and exterior applications, and they can be applied either on-site or in a shop environment. Additionally, the selection includes water-based, solvent-based, and solventless, ultra-high-build, epoxy intumescent coating variants.
Proven and tested fire protection coatings systems
One of the primary benefits of partnering with Dulux Protective Coatings is our ability to deliver a comprehensive coatings system that includes fire protection.
In addition to the intumescent coatings, we offer primers and topcoats that have been rigorously tested to function cohesively in the event of a fire. Our extensive range of intumescent solutions is designed to meet the specific requirements of each individual project.
Getting intumescent coatings right
Philip Vodanovich, the National Commercial Manager for Protective Coatings at Dulux Protective Coatings, says, “Our range of intumescent coatings sets new standards in efficiency and effectiveness. Some of these products are designed for off-site application and can be recoated or handled within an hour, greatly enhancing efficiency.”
The DuluxFIRETEX® range of intumescent products supports both off-site and on-site application. Applying intumescent coatings off-site marks, a significant industry change with many steel fabricators now utilising the durability benefits of the FIRETEX®Platinum epoxy coatings to deliver project efficiencies with pre-coated steel delivered directly to site.
It also reduces many safety risks linked to on-site applications, as a controlled workshop environment is easier to manage.
It is always advisable to work with trained applicators who have the right experience and equipment to apply intumescent coatings.
Philip Vodanovich emphasises that asset owners and specifiers should not only review the data sheets and ensure proper application but also reach out to the Dulux Protective Coatings specialist team. This collaboration allows them to receive expert advice on product selection and quantity calculation for their project. By working with the team, customers can successfully achieve the required finish, corrosion protection, and durability, while also incorporating fire protection.
The range of intumescent coatings that are available in New Zealand is shown below.
Dulux® FIRETEX® FX2003 - A solvent-based intumescent coating for exceptional fire protection of interior steel structures, tested and certified to provide up to 120 minutes of cellulosic fire protection for interior steel, meeting New Zealand needs and regulations.
Dulux® FIRETEX® Platinum (formerly FirePro® 9300) - Rated to provide up to 60 minutes of cellulosic fire protection
Dulux® FIRETEX® Platinum-120 (formerly FirePro® 9310) - Rated to provide up to 120 minutes of cellulosic fire protection
Find out more
See the full range of intumescent coatings
Download our Intumescent Coatings for Steel brochure
Contact our technical coatings specialists for specification and application support.
Philip Vodanovich, National Commercial Manager, Protective Coatings Business. philip.vodanovich@dulux.co.nz +6421926216
Graham Gates, Business Development Executive, Protective Coatings Business. graham.gates@dulux.co.nz +6421926223
Serena Smalley, Key Account Manager, Protective Coatings Business. serena.smalley@dulux.co.nz +6421414374
Mike Templeton, Key Account Manager, Protective Coatings Business. mike.templeton@dulux.co.nz +64212226595
Image courtesy of Ahrens Group.