21mm Flat Panel Cavity Closer

The function of the cavity closer is to prevent vermin intrusion, and to promote weather-tightness by allowing drainage and air ventilation to dry the cavity should moisture breach the external cladding. The Redway range of uPVC Cavity Closers have been designed to provide the ideal solution for architects, builders and installers to meet these requirements. Redway Cavity Closers are available at all leading building merchants nationwide.

Details
  • Category
    Roof Flashings & Cappings
  • Range
    Cavity Closers (PVC)
Specifications
  • BRANZ Appraised (Australia 980)
  • Lightweight for easy transportation and installation
  • Biologically and chemically resistant to treated materials
  • UV stabilised PVC as required by BCA
  • Colour - White
  • Model Name - 21mm Cavity Closer
  • Model Number - RDCC21
  • Material - uPVC
Flat Cladding

Redway has designed a top and bottom Cavity Closer from extruded uPVC to be used in either a Drained Cavity wall or Ventilated Cavity wall situation.

  • A drained cavity wall is vented at the bottom only. Water is able to drain and limited (but often sufficient) air is able to enter the cavity to dry any remaining moisture between wetting cycles. Products required: Redway Cavity Closer.
  • A ventilated cavity wall is vented at the top and bottom. As per the drained cavity, the bottom vent allows drainage and air entry. The addition of the top vent creates a moving air path. This method should be considered when drying is inhibited due to rapid wetting cycles or where walls are permanently shaded as they pose a higher risk of moisture build up and mould formation. Products required: Redway Cavity Closer and Redway Top Vent Cavity Closer.
Where to Buy

Bunnings Warehouse

We have a range of products that are stocked in Australia and can be purchased through Bunnings. Additional products are warehoused in our NZ location but available upon request to Australia

Get in touch
For any enquiries regarding purchasing or using any of our products. Complete the contact form below, or call us on 0800 522 533.
Visit Website

About the
Seller

  • Products listed
  • Recent Responsiveness

    86%

    Usually responds within
    8 hours on weekdays

Masons provide a range of quality trade building products from a complete Enclosure Building Wrap System and Exterior Cladding, to Brick Reinforcement, and are a crucial supplier in the New Zealand building industry.

Masons strive to be at the forefront of developing innovative products that raise the standards of New Zealand building products.