AccuThermax™ XPS 400 Extruded Polystyrene Board
Auckland
- 290.2K profile views
- 61 saves
AccuThermax™ XPS is a rigid closed-cell extruded polystyrene board, stocked and supported in New Zealand by Accumen Shapes Ltd. We hold standard sheets and cut to size for the job. AccuThermax™ XPS is also the core of our Slab Edge Insulation, the Accumen SEI board.
Specifiers, architects and engineers choose it for the jobs where insulation has to carry load and live with ground moisture: under-slab and perimeter floors, retaining walls and below-grade work, masonry and concrete walls, and exterior walls and roofs behind claddings.
Board-only R-values run from R0.59 at 20 mm to R2.94 at 100 mm at 15 degrees C, calculated from a declared design lambda of 0.034 W/mK to AS/NZS 4859.1:2018 and underpinned by independent measurement at BRANZ and BEAL. Compressive strength is 459 kPa at 10 per cent strain, measured by WSP on the 400 grade to AS 2498.3.
Insulation loses performance when it holds water, so the moisture behaviour here is measured rather than claimed. After 24 hours fully immersed the board carried 23.1 per cent water by mass on removal, draining to 2.0 per cent within an hour, because the closed cells do not retain absorbed water (BEAL TR240208-1, ASTM C272). Vapour permeance is 1.06 g/(m2.24h.mmHg) to ASTM E96.
Product Details
- Product
- AccuThermax™ XPS 400 Extruded Polystyrene Board
- Category
- Underfloor Insulation
- Sold by
- Accumen Shapes
- Range
- Insulation
- Brand
- AccuThermax
- Country of origin
- Australia
- Type of use
- Commercial and Residential
- Package type
- Special packaging required
- Care and cleaning
- Easy maintenance
- Installation
- Professional installation recommended
- Warranty
- 15 years
Accumen Shapes is specified by
Houston ArchitectsArchitects
Hulena ArchitectsArchitects
Patterson AssociatesArchitects
ArchitectusArchitects
Salmond Reed ArchitectsArchitects
Archaus ArchitectsArchitects
Shore BuildBuilders
Creative ArchArchitectural Designers
Weir ArchitectureArchitectural Designers
WG de Gruchy ConstructionBuilders
Lewis BuildBuilders
HawkinsConstruction
Latham ConstructionConstruction
Landmark Homes New ZealandBuilders
Lindesay ConstructionConstruction

AccuThermax™ XPS is a rigid closed-cell extruded polystyrene board, stocked and supported in New Zealand by Accumen Shapes Ltd.
We hold standard sheets and cut to size for the job. AccuThermax™ XPS is also the core of our Slab Edge Insulation, the Accumen SEI board.
Specifiers, architects and engineers choose it for the jobs where insulation has to carry load and live with ground moisture: under-slab and perimeter floors, retaining walls and below-grade work, masonry and concrete walls, and exterior walls and roofs behind claddings.
Board-only R-values run from R0.59 at 20 mm to R2.94 at 100 mm at 15 degrees C, calculated from a declared design lambda of 0.034 W/mK to AS/NZS 4859.1:2018 and underpinned by independent measurement at BRANZ and BEAL. Compressive strength is 459 kPa at 10 per cent strain, measured by WSP on the 400 grade to AS 2498.3.
Insulation loses performance when it holds water, so the moisture behaviour here is measured rather than claimed. After 24 hours fully immersed the board carried 23.1 per cent water by mass on removal, draining to 2.0 per cent within an hour, because the closed cells do not retain absorbed water (BEAL TR240208-1, ASTM C272). Vapour permeance is 1.06 g/(m2.24h.mmHg) to ASTM E96.
- Scope of use
Dimensionally stable under thermal and humid ageing (BEAL TR240214-5, ASTM D2126), inert and moisture resistant, AccuThermax™ XPS suits structural and civil duty. Grade follows the job: 300 grade for walls and general envelope insulation, 400 grade for under-slab, perimeter and trafficked floors, and 500 grade on request. Typical uses:
- Floors subject to engineered loads and constant traffic
- Inverted roofs and rooftop gardens
- Parking decks
- Slab edge insulation
- Commercial purlin roof spacers
Straight talk on fire. XPS is combustible and holds no Group Number in bare form, so the reaction-to-fire performance of the installed system comes from the lining or cladding specified to C/AS1, C/AS2 or C/VM2. The board must not be left as an exposed interior finish, and is kept clear of open flame, hot work and other ignition sources in storage and installation.
Blown with a CFC-free and HCFC-free agent of zero Ozone Depletion Potential (declared), AccuThermax™ XPS limits heat flow through the envelope, reduces internal temperature swings and lowers reliance on air-conditioning. That means less energy used, and fewer emissions, over the life of the building.
Key benefits of AccuThermax™ XPS
- 459 kPa at 10 per cent strain, measured on the 400 grade (AS 2498.3)
- Expected service life of not less than 15 years when installed protected
- Lightweight and easy to handle
- Closed cells do not retain absorbed water: 2.0 per cent by mass after one hour drainage (ASTM C272)
- Aged design lambda 0.033 W/mK, determined by the slicing method
- CFC-free and HCFC-free blowing agent, zero Ozone Depletion Potential (declared)
- Contributes to NZBC H1, B2, E3 and F2 as a component; BPIR disclosure published
- Declared design lambda 0.034 W/mK at 15 degrees C to AS/NZS 4859.1:2018
- Performance
Thermal conductivity has been measured independently twice: 0.0283 W/mK at 15 degrees C by BRANZ (DI17843-02, ASTM C518) and 0.0272 W/mK by BEAL (TR230910-1, ISO 8302 / ASTM C177). The value declared for construction R-value calculations is 0.034 W/mK at 15 degrees C to AS/NZS 4859.1:2018, with an aged value of 0.033 W/mK determined by the slicing method.
Compressive strength is 459 kPa at 10 per cent strain on the 400 grade, measured by WSP to AS 2498.3. The 300 grade is declared at 293 kPa and the 500 grade is available on request.
Maximum continuous service temperature is 75 degrees C and the board softens at approximately 90 degrees C. It is not a structural or bracing element, is not suitable for permanent UV exposure, and should be kept clear of aggressive solvents, fuels and solvent-based adhesives.
Test reports are available to BCAs and specifiers on request, complete and unaltered, under written authorisation.
- Data Sheets
- The AccuThermax™ XPS Technical Data Sheet, Safety Data Sheet, BPIR disclosure and brochure are all in the Downloads section.
Downloads
Downloads (6)6 Direct downloads • 5 Available on request
Frequently asked questions about
AccuThermax™ XPS 400 Extruded Polystyrene Board
The AccuThermax™ XPS 400 Extruded Polystyrene Board is supplied by Accumen Shapes. It is also on their website, and you can browse every product Accumen Shapes lists on ArchiPro.
Accumen Shapes does not publish a price for the AccuThermax™ XPS 400 Extruded Polystyrene Board on ArchiPro. for pricing, or visit their website.
It is listed under Underfloor Insulation on ArchiPro, where you can compare it with underfloor insulation from other suppliers.
Yes. It is part of the Insulation range from Accumen Shapes, where you can see every product in the range together.
from this page, see their contact details on ArchiPro, or visit their website. The Accumen Shapes profile on ArchiPro has the rest of their products.
More products from
Accumen Shapes
More in
Underfloor Insulation
Everything else in Underfloor Insulation, from every supplier on ArchiPro.
Supplier Reviews












