A plasticser that has been manufactured especially for use by brick and block layers
MASONS™ Air-Flex is a plasticiser that has been manufactured especially for use by brick and blocklayers. The scientific formulation of MASONS™ Air-Flex provides the tradesman with a safe, low dosage, and extremely economical mortar plasticiser. When using MASONS™ Air-Flex as a mortar additive no additional admixtures are required. The product performs well regardless of the cement and sand types used. Advantages of Air-Flex
- All types of sand
- Excellent workability
- Longer board life
- User friendly
- Non-toxic
- Cost-effective
- Low dosage
- Sturdy plastic container
- Provides good bond strength
Yield
MASONS™ Air-Flex is used at the rate of 30 grams per 40 kg bag of cement. More or less can be used to suit but do not overdose. Usage is dependant on the sand or cement type and condition. If in doubt contact the manufacturer. Each container of MASONS™ Air-Flex will plasticise the following amount of bags of cement (40 kg).
Health and Safety
Keep out of reach of children May cause skin irritation with repeat contact MASONS™ Air-Flex is non-toxic, however, it should not be swallowed or splashed into eyes Seek medical advice if this occurs
Add MASONS™ Air Flex approx. 10-15gr per 20kg of cement
- CategoryWaterproofing Sealants
- RangeBuilding Products
OTHER PRODUCTS
IN THIS RANGE
About the
Seller
- Products listed
- Recent Responsiveness
86%
Usually responds within
8 hours on weekdays
Masons provide a range of quality trade building products from a complete Enclosure Building Wrap System and Exterior Cladding, to Brick Reinforcement, and are a crucial supplier in the New Zealand building industry.
Masons strive to be at the forefront of developing innovative products that raise the standards of New Zealand building products.
- ArchiPro Member since2020
- LocationView address
- More information