Skip to main content

Gaggenau Vario Teppan Yaki 400 Series 38 cm

by Selectrix Wanaka

Wanaka, New Zealand

Selectrix Wanaka logo
  • 126.2K profile views
  • 32 saves
Visit Website
  • Cooking directly on the hard-chromed metal surface, without any pots or pans
  • Exact temperature control up to 240 °C
  • Optimum heat distribution
  • Solid stainless steel control knob
  • Precision crafting of 3 mm stainless steel
Gaggenau Vario Teppan Yaki 400 Series 38 cm
Visit site
  • Cooking directly on the hard-chromed metal surface, without any pots or pans
  • Exact temperature control up to 240 °C
  • Optimum heat distribution
  • Solid stainless steel control knob
  • Precision crafting of 3 mm stainless steel
Specs

Cooking zones

  • Usable area W 31 x D 44 cm.

Capacity

  • Control knobs with illuminated ring, cooking zone and temperature markings.
  • Electronic temperature control from 120 °C to 240 °C.

Safety

  • Safety shut-off.
  • Pre-heat and residual heat indicator.

Connection

  • Total connected load 3.0 KW.
  • Connecting cable 1.5 m without plug.
Features
  • Two zones, each 1500 W, can be operated together as a complete surface or each half separately.
  • Keeping warm setting.
  • Cleaning stage.
  • Even with traces of use, always easy to clean like a cast pan.
Performance
  • Depending on the type of installation (surface-mounted or flush-mounted, with or without an appliance cover), the specific location of the cut-out and the knob positions may vary.
  • If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided.
  • The bearing capacity and stability, in the case of thin worktops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads.
  • Additional instructions for flush mounting:
  • Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer.
  • The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.
  • The joint width may vary due to size tolerances of the combinations and of the worktop cut-out.
  • If installing several appliances in individual cut-outs allow for a division bar of minimum 50 mm between the individual cut-outs.
  • A minimum lateral clearance of at least 40 mm from adjacent heat-sensitive furniture or contact surfaces must be observed or thermal insulation fitted.
  • Appliance can be snapped into the worktop from above.
  • Appliance weight: approx. 12. kg

Downloads

Downloads (2)2 Direct downloads • 11 Available on request

Get more Specific.

Selectrix Wanaka

100percent.co.nz

Visit the Selectrix Wanaka website for the full range, specification detail and where to buy this product.

Visit Website

Frequently asked questions about
Gaggenau Vario Teppan Yaki 400 Series 38 cm

The Gaggenau Vario Teppan Yaki 400 Series 38 cm is supplied by Selectrix Wanaka. It is also on their website, and you can browse every product Selectrix Wanaka lists on ArchiPro.

Selectrix Wanaka does not publish a price for the Gaggenau Vario Teppan Yaki 400 Series 38 cm on ArchiPro. for pricing, or visit their website.

It is listed under Cooktops on ArchiPro, where you can compare it with cooktops from other suppliers.

Yes. It is part of the Gaggenau range from Selectrix Wanaka, where you can see every product in the range together.

from this page, see their contact details on ArchiPro, or visit their website. The Selectrix Wanaka profile on ArchiPro has the rest of their products.

More products from
Selectrix Wanaka

The rest of this range, and everything else Selectrix Wanaka makes.