HB1470 310mm Flush Pull for Sliding/Cavity Doors

By Halliday + Baillie
Visit Website

Designed to compliment the existing range of Halliday and Baillie Flush Pulls, the new larger HB1470 responds to the increasing size of interior doors. For hinge or pivot doors the companion HB1475 Bi-fold Flush Pull keeps a seamless look across a project.

(Shown with an HB680 End Pull - Flush Pulls sold separately)

Minimum Door Thickness Required: 33mm if used back to back with no end pull, 42mm if used back to back with an HB680 End Pull as pictured.

Material: Solid brass

Flush pulls : 310mm x 50mm x 15mm

Suitable for timber or aluminium doors

For finish options please see out current finishes sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.

Flush pulls are designed to be mounted with the body within the thickness of the door, and the face surface mounted - total projection is 2mm.  Glue, epoxy, silicone products etc are not required or recommended for installation, and may void warrantee. 

Details
  • Category
    Cavity Slider Doors, Sliding Door Gear
  • Range
    Euro Rollerball lock - 55mm backset
  • Brand
    Halliday + Baillie
  • Designer
    Halliday + Baillie
Visit Website

More from
Halliday + Baillie

HB677 250mm Flush Pull for Sliding Doors
HB677 250mm Flush Pull for Sliding Doors
By Halliday + Baillie
HB 860 Brass Soft Edge Flush Pull for Sliding/Cavity Doors
HB 860 Brass Soft Edge Flush Pull for Sliding/Cavity Doors
By Halliday + Baillie
Sliding Door Lock Series for Sliding/Cavity Doors
Sliding Door Lock Series for Sliding/Cavity Doors
By Halliday + Baillie
HB1930 Rectangular Flush Pull for Hinge, Sliding and Cavity Doors
HB1930 Rectangular Flush Pull for Hinge, Sliding and Cavity Doors
By Halliday + Baillie
HB660 170mm Flush Pull for Sliding/Cavity Slider Doors
HB660 170mm Flush Pull for Sliding/Cavity Slider Doors
By Halliday + Baillie
HB650 105mm Flush Pull for Sliding/Cavity Slider Doors
HB650 105mm Flush Pull for Sliding/Cavity Slider Doors
By Halliday + Baillie
HB630 Lock Series for Sliding/Cavity Slider Door
HB630 Lock Series for Sliding/Cavity Slider Door
By Halliday + Baillie
HB638 Lock Series for Sliding/Cavity Slider Doors
HB638 Lock Series for Sliding/Cavity Slider Doors
By Halliday + Baillie
HB640 Lock Series Narrow Backset for Sliding/Cavity Slider Doors
HB640 Lock Series Narrow Backset for Sliding/Cavity Slider Doors
By Halliday + Baillie
HB690 170mm Privacy Set for Sliding/Cavity Slider Doors
HB690 170mm Privacy Set for Sliding/Cavity Slider Doors
By Halliday + Baillie
View more

About the
Seller

Halliday + Baillie is a New Zealand design company that has been operating for over 26 years, and exporting hardware worldwide for well over 20 years. 

We expanded H+B into Australia in 2003 with main hub in Sydney and more recently a display studio in Melbourne. We have suppliers all around Australia who help Halliday + Baillie designs be available all through Australia.

Email us for more on: sales@hallidayandbaillie.com 

All our Halliday + Baillie products are proudly designed and manufactured in New Zealand. 

Our design encompasses quality, flair, functionality, and longevity. 

Products are proudly produced in New Zealand where lower volumes enable careful monitoring with a correspondingly high production quality. Handles may be turned a thousand times a day, so materials and finish are amongst the highest priorities. Longevity has become the undisputed hallmark of our success.

The range includes door hardware, sliding door hardware (including a full range of flush pulls, end pulls, flush bolts, locking and privacy sets etc), stair rail brackets, door stops, drawer and blind extrusions and wet area vents. 

Halliday + Baillie architectural hardware products not only look good – they feel good, and the team is continually striving for an aesthetic which will stand the test of time.

Along with our own products, Halliday + Baillie are also the exclusive suppliers in New Zealand and Australia for both the infamous German FSB range of architectural hardware over 120 years old + stocking of the first + original concealed hinges TECTUS by Simonswerk. Simonswerk are also over 135 years old.