Ideal for keeping warm during the cooler months, the Rinnai Novo Cube Freestanding Gas Fireplace is the perfect way to add a modern style to your living space. This freestanding gas fireplace has been New Zealand Designed and New Zealand Made for kiwi conditions, so you know that it will last through many cold winters. The Novo Cube design offers flexibility, so it can be easily integrated into any home without compromise.
Make the most of the winter months and keep your family warm with the Rinnai Novo Cube Freestanding Gas Fireplace. Whether you want to add an extra layer of warmth to your lounge or create a cosy feature in your bedroom, this freestanding gas fireplace is an ideal addition. With stunning design inspired by the much-loved Rinnai Neo, you can be sure that this fireplace will add an elegant touch to any living area.
- CategoryGas Fireplaces
- RangeNovo
- BrandRinnai
- Year2023
- Warranty5 years
- Country of originNew Zealand
- Type of useResidential
- InstallationProfessional installation required
Suitable for freestanding installations in open plan areas and living rooms. As a room sealed appliance it can also be installed in larger bedrooms if this meets the 6.10.6.1 requirements of AS/NZS 5601.1.
Heating areas (up to)
- Upper North Island: 112 m2
- Central and lower North Island: 77 m2
- South Island: 65 m2
- Input - 14-30 MJ/h
- Output - 3.6-6.6 - kW
- Efficiency - 80%
- Warranty - 5 years
Input and output will vary according to gas type and flue configuration. 5 year firebox warranty, 2 year total warranty.
Codes
- RDV2320FN (Novo Freestanding NG)
- RDV2320FL (Novo Freestanding LPG)
Gas type
Available for Natural Gas or ULPG, specify at the time of purchase
Data plate
Lower right hand side of the base panel (in front on the gas control)
Convection fan
120 V AC 50 Hz 2-speed centrifugal blower
Gas connection
Brass ½ " BSPT male fitting. The gas supply terminates inside the unit—lower RHS of the appliance.
Ignition
230-240 V AC 50 Hz high voltage electronic spark
Installation considerations
Room size, smaller rooms will heat up quickly, and due to the heat of the appliance, the fire will turn to a low setting once the set temperature has been reached.
Flue system
Direct vent coaxial flue. Draws air for combustion from the outside and expels combusted gases to the outside. Appliance must be installed with a Rinnai flue system.
- inner Ø100 mm
- outer Ø170 mm
Noise level
37-45 dB(A)
Electrical
A 1.5 m power cord with a three pin plug is supplied. The power cord passes through a slot in the back left hand corner of the appliance.
Safety devices
Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detection.
Temperature control
Operated using a basic infra-red remote, or for more features such as timers and thermostatic control, by using a Wi-Fi module (purchased separately) and using the Rinnai Wi-Fi fireplace controller app.
Weight
Approx. 75 kg
Temperature control
Back-to-basics simple infra-red remote makes operation easy and stress-free, or upgrade to Wi-Fi capability with our Wi-Fi module kit.
OTHER PRODUCTS
IN THIS RANGE
About the
Seller
- Products listed
- Recent Responsiveness
100%
Usually responds within
3 days on weekdays
- ArchiPro Member since2018
- More information