Hebel PowerPanel+
A high performing product for external, internal and fire tunnel walls in commercial and industrial construction.
Used for a range of applications, including low-rise industrial, commercial developments and high-rise offices, the PowerPanel+ system consists of Hebel panels installed vertically or horizontally to steel or concrete structural framing as a non-loadbearing cladding. This provides a cost-effective solution, with lightweight panels allowing reduced structural components and smaller lifting equipment compared to concrete.
Strong and solid, PowerPanel+ contains steel-reinforcement coated with a layer of anti-corrosion protection for maximum strength and durability. With excellent fire rating properties, thermal resistance performance, and less wastage resulting from the fact PowerPanel+ can be made to length, this system is the ideal choice for your next commercial or industrial project.
Benefits
- Strong and Secure
- Fast Construction Times
- Risk Minimisation
- Easy Fire-Rating Compliance
- Easy Acoustic Compliance
- Superior Insulation Qualities
- Maximised Floorspace
- Design Efficiency
- High Sustainability
- Product Versatility
- CategoryWall Panels & Cladding
- RangeCommercial & Industrial
PowerPanel+ for Commercial Walls
PowerPanel+ 100 – Commercial Wall Panels – Non Cuttable – (100mm Panel is offset T&G only) – AVAILABLE ON REQUEST ONLY
- 2700x450x100mm T&G2M5
- 3000x450x100mm T&G2M5
- 4500x600x100mm T&G2M5
PowerPanel+ 125 – Commercial Wall Panels – Non Cuttable – AVAILABLE ON REQUEST ONLY
- 4500x600x125mm T&G2M10
- 5990x600x125mm T&G2M10
PowerPanel+ 150 – Commercial Wall Panels – Non Cuttable – AVAILABLE ON REQUEST ONLY
- 4500x600x150mm T&G2M10
- 5990x600x150mm T&G2M10
PowerPanel+ Made to Order (MTO) – Commercial Wall Panels (100mm to 125mm thick) – Non Cuttable – (100mm Panel is offset T&G only) – AVAILABLE ON REQUEST ONLY
- Up to 4000x600x100mm T&G – 5mm Bevel
- Up to 6000x600x125mm T&G – 10mm Bevel
PowerPanel+ Made to Order (MTO) – Commercial Wall Panels – Non Cuttable (150mm to 300mm thick) are to be designed and reinforced to achieve greater windloads and panels spans – AVAILABLE ON REQUEST ONLY
- Up to 6000x600x150mm T&G – 10mm Bevel
- Up to 6000x600x175mm T&G – 10mm Bevel
- Up to 6000x600x200mm T&G – 10mm Bevel
- Up to 6000x600x250mm T&G – 10mm Bevel
- Up to 6000x600x300mm T&G – 10mm Bevel
T&G = Tongue & Groove; 2M = Caged; 5 = 5mm Bevel; 10 = 10mm Bevel; Note: MTO Widths can vary 300mm to 600mm
Note: Panels are non -cuttable i.e made to length
Note: All Made to Order products are: Made to Confirmed Order Only – Minimum quantities and lead times apply – Engineering checks apply.
About the
Seller
Hebel is a high performance building product used to create comfortable and sustainable homes and buildings.
What is Hebel?
Hebel is a strong, versatile, high performance building product made from Autoclaved Aerated Concrete (AAC).
All Hebel products in NZ are designed and manufactured in Australia by CSR Hebel. With over 25 years of experience, you can be assured that you are getting a high quality product from one of the most trusted names in building, with the local technical expertise to back it up.
Available in blocks and panels, Hebel is easy to handle, quick to build with, and better to live in.
Hebel panels contain anti-corrosion steel reinforcement for added strength and are available in a range of lengths for applications including walls, floors and external cladding.
Where can it be used?
Hebel is a versatile building material that can be used for a number of applications including houses, apartments, commercial buildings and civil applications.
Benefits of Hebel
Hebel delivers a range of benefits to both the builder and homeowner - it’s quick and easy to build with, better to live in, and a sustainable way to build.
- Quality and Speed
- Strong and Solid
- Energy Efficient
- Noise Reduction
- Eco-friendly
- Risk Minimisation
What is AAC?
Autoclaved Aerated Concrete (AAC) is a versatile, strong lightweight building product.
The History of AAC
Autoclaved Aerated Concrete (AAC) technology was first developed in Scandinavia over 70 years ago and is now used widely all over the world. But what is its history and how did thisrevolutionary material later become known as 'Hebel'?
Lightweight and environmentally friendly, AAC was perfected in the mid-1920s by the Swedisharchitect and inventor Dr. Johan Axel Eriksson and soon gained rapid popularity in Europe due toits superior insulation properties and ease of installation.
But it wasn’t until decades later that its full potential was truly realised…
In 1945, German construction engineer Josef Hebel established a manufacturing process where prefabricated AAC panels were reinforced with steel – vastly improving the material’s strength and structural reliability.
The patented product, which he named ‘Hebel’, also accelerated the traditional time of construction. It became instrumental in the rapid rebuild of damaged German cities as a result of WWII. With this local success soon came global expansion, as Mr Hebel constructed factories in the Middle East, Asia and Greater Europe.
Hebel’s reputation has stood the test of time, and today we continue to lead the way in fast, economic and sustainable building solutions.
What can AAC be used for?
AAC is a very versatile building material.
Hebel have developed a number of products and systems for external cladding, internal walls, party walls, boundary walls, fences and floors for houses, apartments, commercial buildings and civil applications.
- ArchiPro Member since2022
- More information