RAK Phoenix Wall Hung Urinal
The Phoenix wall hung urinal is a timeless design that will suit all bathrooms. The Phoenix is available with both rear inlet & top inlet water connections, and has a concealed waste trap.
Care should be taken to ensure correct flushing volumes are maintained to ensure complete hygiene and complete rinsing of waste pipes.
- CategoryCommercial Toilets and Urinals, Urinals
- RangePhoenix
- BrandRAK Ceramics
- Warranty1 year
- Country of originUnited Arab Emirates
- Type of useCommercial and Residential
- InstallationProfessional installation recommended
Colour: White only.
Inlet connection: ½" BSP inlet connector included with RA-PH3200. RA-PH3100 requires flush valve connection pipe to be supplied with valve set. Refer Installation instructions for details.
Waste outlet: Waste trap included. Plumber to install Ø50 waste (socket end to urinal) pipe in wall.
Water pressure range: 100-500kPa.
Fixings: FS37UK fixing kit included.
Dimensions: All dimensions in mm. tolerance ±5% for below 200mm and ±3% above 200mm.
Flushing: Refer separate literature for our RAK electronic flush valves , Delabie flush valves and Zurn flush valves.
RA-PH3100 - RAK Phoenix top inlet urinal complete with fixing kit.
RA-PH3200 - RAK Phoenix rear inlet urinal complete with fixing kit.
More from
MacDonald Industries
About the
Seller
New Zealand's Leading Commercial Bathroom Products Supplier
Bathrooms for public buildings have a unique set of requirements.
Unlike residential environments these bathrooms can be subject to intermittent, intensive use by a range of diverse users over short and long periods of time. Solutions need to provide robust, efficient and cost effective whole-of-life outcomes. Hydraulic design with the appropriate behind and front-of-wall fittings are vital for the long term viability of a commercial bathroom.
With over 55 years experience in the design, specification, supply and installation of bathrooms for hospitals, schools, prisons, shopping malls, swimming pools, marae's, public buildings, sports stadiums, airports and public toilets Macdonald Industries has seen it all.
Our Technical Consultants are available to support Architects, Engineers, Plumbers and installers through the most complex of installations.
Our customers demand;
- reliability
- recognised performance
- efficiency
- robustness and
- cost effectiveness.
MacDonald Industries manufacture bespoke solutions such as Warden, Waterguard and Solo electronic water controllers and choose their supply partners from leaders around the world such as Delabie, KWC-Franke, RAK, ASI, WISA and Zurn Wilkins .
- ArchiPro Member since2022
- LocationView all locations (+1)
- More information