Light Fittings & Accessories

LED drivers provide LED light bulbs with the electricity required to function and perform correctly. LEDs run on low voltage direct current, unlike bulbs that operate on a higher voltage alternating current. This means that LEDs need drivers to convert that alternating current to direct current. This will keep the voltage flowing through an LED circuit at the rated level that the LED requires. 

Constant current and constant voltage are the two main types of drivers. Each is designed to operate LEDs with different electrical requirements. LED light bulbs designed to replace household bulbs mostly contain internal drivers and don't require external ones. Always match the old driver's input and output requirements as closely as possible when choosing replacement LED drivers.

LED strip lights are a versatile solution for any lighting requirements. They can be utilised in a number of applications, such as stair lighting, railing lighting, under cabinet lighting, pathway lighting, cove lighting, and so much more. Strip lights are available in a variety of solid colors or RGB color changing kits when paired with an RGB controller. They are very environmentally friendly and reduce energy bills significantly. 

The heat emitted is also far less than traditional overhead lighting installations. They are safe for indoor and outdoor applications, and they work very well in LED tube light configurations. They are best kept uncut and protected from direct contact with water. Their low voltage of 12-24 Volts minimizes the risk of electrical shorts and safety hazards. 

Light Bulbs and tubes are available in many types, shapes, and sizes. They have a different range of applications, fittings, and technology. LED Light Bulbs and LED tube lights have become increasingly popular due to their durability and functionality. They offer instant-on, efficient lighting. Compact fluorescent light bulbs or lamps are energy-saving lights. CFL Light Bulbs and lamps are designed as replacements for incandescent light bulbs and halogen light bulbs.  Check the light bulb socket and the bulb base together to confirm that the replacement is compatible. Ceiling socket outlets suit compatible plug-in pendants, while fixed-wire fittings may use a ceiling rose and lamp holder.

Fluorescent tube lights are a cost-efficient lighting option commonly used in offices, warehouses, and supermarkets. These tube lights offer consistent brightness with low running costs. Halogen bulbs are used across a variety of lighting applications, from domestic to commercial lights. Incandescent light bulbs are commonly found in car indicators and high-temperature applications, such as oven and rotisserie bulbs. A fluorescent batten fitting is suited to spaces that need an even spread of light along a longer ceiling or wall.

Bayonet bulbs are used in a variety of lighting around the home and one of the most common types of fittings. A bayonet bulb uses a twist and lock action to secure into the fitting and it’s also known as B22 bulbs. Screw base bulbs, also known as Edison bases or an E27 bulb, use a screw thread to secure it into the fitting. So it’s important to ensure the right bulb is chosen for the type of base being used.

Set the tone and control energy usage in a room by getting the right combination of light switches and dimmers. Dimmers control the brightness of the lighting. They are compatible with many common fixtures and quickly enhance the ambiance of a room. They also help conserve energy.  Modern light switches may also support connected controls, sensors or other accessories alongside manual switching.

There are a few things to consider before installing a dimmer switch. While dimmers reduce the intensity of a wide assortment of lamps and light fixtures, they require compatible light bulbs to function correctly. Find the right dimmer to enjoy a beautiful quality of light and lower energy bills. A lighting control panel or compatible controller may be needed when several fittings are managed from one system.

• Purpose - This refers to what is done in a room and where the light needs to shine. In a kitchen, the eating and cooking area is usually the main focus. The kitchen may be lit overhead, over a table, over a sink, and even under the cabinets. Consider what best suits the environment. For special events like birthday parties, one may use colored light bulbs. Coloured light bulbs are a great party light feature with so many pieces to pick from. Outdoor light bulbs can be either decorative or practical. Consider how bright the light must be or what kind of atmosphere it needs to create?

• Maximum wattage - What is the maximum wattage that the fitting can contain? Fittings work hand in hand with bulb wattage limits. Going beyond the approved wattage limit can lead to a serious risk of fire and other damages.

• Bulb type -  Make a note of which bulb base is being used, either an E27 bulb or a bayonet bulb. Then also decide which type of bulb is going to be the most optimal; incandescent, halogen, fluorescent, xenon, or LED?

• Weight - Does the old fixture and the new fixture weigh about the same? If so great. It is important to pick a fixture that weighs about the same as the old one. If you do get a heavier one install a different junction box that can handle more strain. For ceiling fixtures, a heavier one may require additional fortification of the ceiling board and beams.

• Voltage - Most fixtures use 120 volts, but a few varieties including track lighting and under-cabinet lighting operate off low voltage (12 volts).  Generally, outdoor light bulbs for gardens and landscapes use low voltage. Outdoor light bulbs make it easy to enjoy the outdoors even when it is dark outside.