Bricklayers

Q: Why do bricklayers cover their bricks?

This technique is used to postpone the quick drying of mortar, which causes poor adhesion between bricks because moisture in the sand and cement mixture provides the binding. The hardness of mortar is produced chemically rather than via drying.

Q: Can you lay bricks in the rain?

You can lay bricks in light rain when the temperature is over four degrees celsius. On the other hand, severe rain could drain the lime from the mortar and weaken the link between bricks and mortar.

Q: Can brickwork be done in cold weather?

Yes, but it depends on how cold it is. Cold temperatures can cause the link between the mortar and the brick to fail. This is more common at temperatures below two degrees Celsius.

Bricklayers, similar to but distinct from masons, are craftsmen and artisans who lay bricks to build brickwork. They build, extend, and repair residential and commercial buildings and other structures like foundations, walls, chimneys, and ornamental masonry work. You will always be able to see the difference between experienced and inexperienced bricklayer workmanship. Only the best brick and block laying specialists in New Zealand are featured on ArchiPro.

Doug Hodge Bricklaying

Richie's Brick & Block Ltd

, Building Construction

Featuring the best bricklayers in New Zealand

ArchiPro carefully selects featured bricklayers to ensure they have the essential abilities and expertise for every task. They pay close attention to detail and are exceedingly meticulous. They know the building and construction industry well.

They have the adaptability and flexibility to work on various projects alongside the other building and construction professionals on Archipro. They work on various projects in the architecture and building industry, such as home repair and renovations, cladding, designing, and many more.

Types of services that a bricklayer provides

Bricklayers in New Zealand work on a broad range of assignments that involve the following services:

New buildings

They use different types of bricks to construct foundations, walls, floors, partitions, and other brick structures for nearly all building work alongside plasterers and renderers.

Waterproofing and caulking

Repairing cracks in your foundations and walls are also part of bricklaying operations in New Zealand. Depending on the condition, this technique may necessitate the use of a waterproofing sealer or caulk to reduce the effects of harsh weather conditions.

Chimney construction and repair

They can build and repair any chimney structures you may need for indoor and outdoor fireplaces and work with different materials to create beautiful layered designs. A pizza oven bricklayer also falls under this category.

Concrete work and paving

Blocklayers in New Zealand can construct fire pits, poolside decks, outdoor living areas, pathways, driveways, foundations, fireplaces, and other structures built using bricks, stones, and blocks.

Preservation and restoration

Brick veneer layers can remove or repair defective work without causing further damage and restore your brickwork to its former glory without you needing to lose the historical value or aesthetic appeal of your existing structure.

The advantages of hiring a skilled bricklayer

While several bricklaying contractors in New Zealand claim to know all types of brick repair and block layer work, numerous applications and techniques exist for different projects. Hiring a professional will reduce the guesswork regarding the proper materials and quantities for the job.

Commercial bricklayers know how to keep air, water, and vermin out of a structure, increasing its lifespan and lowering the danger of costly failures. They will properly remove defective materials and inspect for cracks, ensuring that your surfaces are defect-free and saving you money.

How to choose the best bricklayers for your project

Choosing the right bricklayer in New Zealand is critical since this aspect of your building project can make or break it. The first step is to compile a shortlist of reputable bricklaying companies servicing your area, easily done on ArchiPro. When assessing these candidates, there are various aspects to consider.

Look for a bricklayer who has undergone extensive training to get certain certifications. Ensure that the specialists you intend to engage supply the required services. Some specialise in residential construction, while others are more familiar with commercial duties.

Look for someone who provides the service you require. Then contact the candidates on your list, meet with them and ask them questions that include:

Do you have a specialisation, or are you a generalist?
Is it possible to get a written quote for my project?
Can I see your insurance proof for work in New Zealand?
Who is responsible for purchasing project materials?
Do you have any references from clients in New Zealand?

How many blocks can a bricklayer lay in a day?

Residential bricklayers lay between 300 and 500 bricks daily, depending on the weather and the job's difficulty. It is advisable to lay a maximum of six courses daily on particularly tall walls. This allows the concrete to fully set and harden, reducing the likelihood of the wall failing.